Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
This guide is for DIY enthusiasts and professionals looking to protect and decorate metal surfaces. The Rustins Quick Dry Metal Paint in White offers a fast-drying, low VOC solution that can be applied directly to bare or galvanized metal, eliminating the need for a primer. A potential caveat is that it's not suitable for use under cellulose finishes.
| Colour | White |
|---|---|
| Model Part Number | MPWH1000 |
| Brand | Rustins |
No, the Rustins Quick Dry Metal Paint is formulated for direct application onto bare and galvanised metal without the need for a separate primer.
The paint dries to the touch in approximately 2 hours.
While it's designed for bare metal, it can be applied over existing compatible paint finishes if they are sound and well-adhered. Lightly sanding the old surface may improve adhesion.
It is suitable for various ferrous metal surfaces, including gates, metal tanks, railings, and garden furniture, for both indoor and outdoor use.
Brushes and equipment can be cleaned easily with water immediately after painting.
This paint is not specifically designed for high-temperature applications. For items exposed to extreme heat, a specialized heat-resistant paint would be more appropriate.
This is a low VOC paint, meaning it has reduced volatile organic compounds compared to traditional solvent-based paints.
Ensure the metal surface was properly cleaned and dried before application. Remove all traces of grease, oil, or dust. Ensure no contaminants were present.
Ensure you are stirring the paint adequately before and during use. Avoid painting in direct sunlight or very hot conditions, which can accelerate drying. Apply thin, even coats.
Thoroughly remove loose rust with a wire brush or sandpaper before painting. A second or third coat may be necessary for optimal coverage and protection on heavily pitted or rusted surfaces.
Use a good quality brush or roller suitable for water-based paints. Apply thin, even coats and avoid over-brushing. Ensure the paint is stirred well.
Setup:
Compatibility:
Care:
