Rustins Quick Dry Metal Paint - Green 500ml

Not Available Rustins Quick Dry Metal Paint - Green 500ml

Not Available

Not Available

Not Available

A quick drying water based direct to metal paint. No primer required. Suitable for bare metal, cas...

Currently unavailable

Colour

Black Gold Green Silver White

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

This guide is for anyone looking to quickly and easily protect and beautify metal surfaces. Rustins Quick Dry Metal Paint in Green offers a fast-drying, water-based solution that requires no primer, saving you time and effort. However, it's important to note that it is not suitable for use under cellulose finishes. This paint is ideal for both interior and exterior use on bare metal, cast iron, and galvanised metal, providing a durable, smooth satin finish in just hours.

All features

Colour	Green
Brand	Rustins

Extended Product Information

FAQs

How much surface area does a 500ml tin cover?

A 500ml tin will cover up to 7m².

Can I use this paint on wood?

No, this paint is specifically designed for use on metal surfaces.

Is a primer necessary?

No, this paint is designed to be applied directly to the metal surface without a primer.

What is the drying time?

The paint is touch-dry in 30 minutes and recoatable in 2 hours.

Is this paint suitable for outdoor use?

Yes, it is suitable for both interior and exterior use.

How many coats should I apply?

Two coats are generally sufficient, but three coats are recommended for improved durability.

How do I clean my brushes after use?

Clean brushes with water immediately after use.

What kind of finish does this paint provide?

It dries to a smooth satin finish.

Troubleshooting

Paint is not drying properly.

Ensure the surface is clean and free of contaminants. Make sure the application environment is well-ventilated. Apply thin, even coats and allow sufficient drying time between coats.

Paint is peeling or flaking.

Properly prepare the surface by removing any existing loose paint or rust. Ensure the surface is degreased before application.

Brush marks are visible.

Use a high-quality brush and apply thin, even coats. Avoid over-brushing. Allow the paint to self-level.

Pros and Cons

Pros

Fast drying time allows for quick project completion.
Eliminates the need for a primer, saving time and effort.
Suitable for both interior and exterior applications.
Water-based formula offers low odour and easy cleanup.
Provides a smooth satin finish that enhances the appearance of metal surfaces.

Cons

Not suitable for use under cellulose finishes.
May require multiple coats for optimal durability.
Coverage is up to 14m² per litre, so a smaller tin will cover less surface area.
Requires careful surface preparation for best results.

Setup, Compatibility & Care

Setup

Surface Preparation: Ensure the metal surface is clean, dry, and free from rust, loose paint, grease, and other contaminants. Use a wire brush or sandpaper to remove rust. Degrease the surface with a suitable cleaner.
Application: Stir the paint thoroughly before use. Apply the paint directly to the metal surface using a brush or roller. Two coats are generally adequate, but three coats are recommended for improved durability. Allow 2 hours between coats.
Drying Time: The paint is touch-dry in approximately 30 minutes and recoatable in 2 hours. Full hardness is achieved after a few days.

Compatibility

Suitable for: Bare metal, cast iron, and galvanised metal.
Not suitable for: Use under cellulose finishes.
Compatible with: Water-based metal paints.

Care

Cleaning: Clean brushes with water immediately after use.
Storage: Store in a cool, dry place, away from direct sunlight and extreme temperatures. Keep the container tightly sealed when not in use.
Maintenance: Regularly inspect painted surfaces for damage or wear. Touch up as needed to maintain protection and appearance.