Johnstone's Exterior Hardwearing Gloss Paint - Cream
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Johnstone's Exterior Hardwearing Gloss Paint in Cream is designed for homeowners and DIY enthusiasts seeking a durable, water-resisting, high-gloss finish for exterior wood, metal, and plastic surfaces. Its key benefit is exceptional durability, outperforming conventional gloss systems by up to two years and resisting blistering, cracking, and peeling. A caveat is that for its optimum 6-year durability, it must be used with Johnstone's Weatherguard Exterior Undercoat.
All features
| Colour | Cream |
|---|---|
| Model Part Number | 303934 |
| Brand | Johnstone's |
Extended Product Information
FAQs
What surfaces can I use Johnstone's Exterior Hardwearing Gloss on?
This paint is suitable for exterior wood, metal, and plastic surfaces.
How long does the paint last?
It offers a finish that can last up to two years longer than conventional gloss systems. For optimum 6-year durability, it must be used with Johnstone's Weatherguard Exterior Undercoat.
Do I need to use an undercoat?
An undercoat is not strictly required for basic application, but Johnstone's Weatherguard Exterior Undercoat is recommended for achieving the maximum 6-year durability.
How much area does one tin cover?
The coverage is approximately 11 square meters per tin.
What is the best way to clean my brushes after use?
Clean brushes and equipment immediately after use with white spirit.
Can I use this paint in cold weather?
It is best to apply the paint in dry conditions, avoiding rain, frost, and very high humidity, as this can affect drying and finish.
What is the drying time for this paint?
Drying times can vary depending on temperature and humidity. Typically, it will be touch dry within a few hours, but recoating will take longer. Always check the product tin for specific drying instructions.
Troubleshooting
Paint is not adhering well
Ensure the surface was properly prepared, clean, and dry. Use a suitable primer if applying to bare or problematic surfaces. Ensure the correct undercoat was used for optimal performance.
Uneven finish or brush marks visible
Apply paint in thin, even coats. Avoid over-brushing. Ensure paint is stirred thoroughly. Check for environmental conditions like high humidity or low temperatures that might affect application.
Paint is blistering or peeling
This can indicate moisture ingress. Ensure the surface is fully dry before painting and that adequate preparation, including priming and undercoating, was performed. Check for any underlying issues with the substrate.
Paint is too thick to apply
Stir the paint thoroughly. If still too thick, a very small amount of white spirit can be added as per manufacturer guidelines, but avoid over-thinning as this can affect durability and finish.
Pros and Cons
Pros
- Provides a long-lasting, high-gloss finish.
- Offers excellent resistance to water and weathering.
- Outperforms standard gloss paints in terms of longevity.
- Suitable for a variety of exterior materials.
- Reduces the need for frequent repainting due to its durability.
Cons
- Optimum durability requires the use of a specific undercoat.
- May require preparation for optimal adhesion on certain surfaces.
- Drying times can vary based on temperature and humidity.
- High gloss finish can highlight surface imperfections if not properly prepared.
Setup, Compatibility & Care
Preparation: Ensure surfaces are clean, dry, and free from dirt, grease, and flaking paint. Lightly sand glossy surfaces to improve adhesion. For bare wood, use a suitable exterior wood primer. For metal, use a rust-inhibiting primer if necessary. For maximum 6-year durability, apply Johnstone's Weatherguard Exterior Undercoat before the gloss.
Application: Stir the paint thoroughly before use. Apply with a good quality brush or roller. Apply in dry conditions, avoiding rain or frost. Two coats are recommended for best results.
Compatibility: Suitable for exterior wood, metal, and plastic. Not recommended for use on surfaces that will be immersed in water or subject to heavy abrasion.
Care: Clean brushes and equipment immediately after use with white spirit. Store paint in a cool, dry place, away from direct sunlight and frost. Ensure the lid is tightly sealed.