Johnstone's Exterior Gloss Paint - Black - 2.5 Litre
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Johnstone's Exterior Gloss Paint in Black is ideal for DIY enthusiasts and professionals looking for a durable, high-gloss finish for exterior surfaces. Its key benefit is its water-resisting properties, ensuring long-lasting protection. A potential caveat is that it is specifically formulated for exterior use, so application indoors may not yield the desired results. Key features include a high gloss finish, durability, and suitability for wood, metal, and plastic.
All features
| Colour | Black |
|---|---|
| Model Part Number | 309151 |
| Brand | Johnstone's |
Extended Product Information
FAQs
What surfaces can I use this black gloss paint on?
This paint is suitable for exterior wood, metal, and plastic surfaces.
Do I need to prime the surface before painting?
Yes, it is recommended to prime bare wood and metal surfaces with a suitable primer before applying the gloss paint. Glossy existing paint should be lightly abraded.
How long does it take for the paint to dry?
Drying times vary depending on temperature and humidity, but typically allow 4-6 hours between coats.
Can this paint be used indoors?
This product is specifically formulated for exterior use. While it may cover interior surfaces, its performance and finish might not be optimal compared to interior-specific paints.
How do I clean my brushes after using this paint?
Clean brushes and equipment immediately after use with white spirit.
What is the best way to store leftover paint?
Store leftover paint in a cool, dry place, away from direct sunlight and frost, with the container tightly closed.
Does this paint offer protection against rust?
When applied over an appropriate rust-inhibiting primer on metal surfaces, it provides a durable, water-resisting finish that helps protect against corrosion.
Troubleshooting
Paint not adhering well
Ensure the surface was properly prepared, clean, and dry. Use an appropriate primer for the surface type. Ensure adequate drying time between coats.
Uneven or streaky finish
Ensure paint is thoroughly stirred. Apply with consistent brush strokes or roller pressure. Avoid over-brushing. Consider a second coat for a more uniform appearance.
Paint is too thick to apply
Stir the paint vigorously. If necessary, a very small amount of white spirit may be added, but follow manufacturer recommendations to avoid compromising the finish.
Surface still showing signs of wear after painting
Ensure the surface was properly primed and that two adequate coats of gloss paint were applied. Check for environmental factors that may be accelerating wear, and consider additional protective measures if necessary.
Pros and Cons
Pros
- Provides a tough, high-gloss finish.
- Offers excellent water resistance for outdoor protection.
- Suitable for multiple exterior surfaces like wood, metal, and plastic.
- Durable formulation ensures longevity of the finish.
Cons
- Primarily intended for exterior use; performance on interior surfaces may vary.
- Requires proper surface preparation for optimal adhesion and finish.
- Gloss finish may show imperfections on uneven surfaces.
- Drying times can be affected by temperature and humidity.
Setup, Compatibility & Care
Preparation: Ensure all surfaces are clean, dry, and free from dust, grease, and flaking paint. For bare wood, apply a suitable primer. Metal surfaces may require a rust-inhibiting primer. Lightly abrade glossy surfaces before application to improve adhesion.
Application: Stir the paint thoroughly before use. Apply with a good quality brush or roller. Two coats are recommended for best results. Allow adequate drying time between coats, typically 4-6 hours depending on conditions.
Compatibility: This paint is designed for exterior wood, metal, and plastic. It is not recommended for use on floors or surfaces subject to heavy abrasion. Always test on an inconspicuous area if unsure about compatibility.
Care: Clean brushes and equipment immediately after use with white spirit. Store paint in a cool, dry place, away from direct sunlight and frost. Keep the container tightly closed.