Shopping.co.uk

Rustins Quick Dry Radiator Paint - Satin - White

Not AvailableRustins Quick Dry Radiator Paint - Satin - White
Not Available
Not Available
Not Available
Not Available
Not Available

A quick-drying, low-odour, water-based paint for domestic hot water radiators. This paint contains...

Currently unavailable

Colour
BlackGreyWhite

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

This guide is for homeowners seeking to refresh their domestic hot water radiators with a brilliant white finish. Rustins Quick Dry Radiator Paint offers a low-odour, water-based solution that dries quickly and resists yellowing. However, it's essential to note that this paint is not suitable for oil-filled electric radiators. This guide will provide you with all the information you need to effectively use and maintain your painted radiators.

All features

ColourWhite
Model Part NumberRADS250
BrandRustins

Extended Product Information

FAQs

How much paint do I need?

A 250ml tin covers approximately 3 square meters. Measure your radiator to determine the surface area and calculate the required amount.

Can I use this paint on electric radiators?

No, this paint is specifically for domestic hot water radiators. It is not suitable for oil-filled electric radiators.

How many coats of paint should I apply?

Two thin coats are generally recommended for the best results and coverage. However, depending on the condition of your radiator and the desired finish, you may need more.

What kind of brush should I use?

A brush designed for water-based paints is recommended. A fine-tipped brush will help minimize brush strokes.

How long should I wait between coats?

Allow approximately 4 hours between coats. The paint will be touch-dry in about 30 minutes.

Can I use a roller?

Yes, you can use a roller designed for smooth surfaces. This can help achieve a more even finish.

How do I clean my brushes and rollers?

Clean brushes and rollers with warm, soapy water immediately after use.

Is this paint heat resistant?

Yes, this paint is heat resistant and designed for use on domestic hot water radiators.

Troubleshooting

Paint is not drying properly.

Ensure the radiator is not hot during application. Make sure the room is well-ventilated and that you haven't applied the paint too thickly.

Paint is yellowing.

This is unlikely with this paint, but ensure it is not exposed to extreme heat or direct sunlight, and that you have purchased the correct paint for radiators.

Paint is peeling or flaking.

This often indicates poor surface preparation. Ensure the radiator surface is clean, degreased, and lightly sanded before applying the paint.

Uneven finish.

Apply thin, even coats and avoid over-brushing. If using a roller, make sure it is designed for smooth surfaces.

Pros and Cons

Pros

  • Quick drying time saves time and allows for faster project completion.
  • Low odour makes it more pleasant to work with indoors.
  • Specifically formulated for radiators, ensuring a durable and long-lasting finish.
  • Easy to apply, suitable for DIY enthusiasts.
  • Excellent coverage, providing good value for money.

Cons

  • Not suitable for oil-filled electric radiators.
  • Coverage is up to 3 square meters per 250ml, may require multiple tins for larger radiators.
  • Requires proper surface preparation for optimal adhesion.
  • May require multiple coats for the best finish.

Setup, Compatibility & Care

  1. Preparation:
  • Ensure the radiator is cool and the heating system is off. Clean the radiator surface thoroughly to remove any dirt, grease, or rust. Lightly sand the surface to create a key for the paint to adhere to.
  • Use a suitable primer if necessary, especially if the radiator is heavily rusted or if you are switching from a dark to a light color.
  1. Application:
  • Stir the paint thoroughly before use. Apply the paint evenly using a brush or a roller designed for radiators.
  • Apply thin, even coats, allowing each coat to dry completely before applying the next.
  • Follow the manufacturer's recommended drying times. The paint is usually touch-dry in about 30 minutes, and recoating can be done after approximately 4 hours.
  1. Compatibility:
  • This paint is compatible with domestic hot water radiators and is also suitable for touching up fridges and white appliances.
  • Not suitable for oil-filled electric radiators.
  1. Care:
  • Clean any spills immediately with water while the paint is still wet.
  • Once the paint is dry, clean the surface with a damp cloth.
  • Avoid using abrasive cleaners or solvents, as these can damage the paint finish.