Rustins Quick Drying Radiator Enamel Gloss - Grey
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone looking to refresh or protect their radiators and appliances with a durable, heat-resistant finish. The Rustins Quick Drying Radiator Enamel offers a fast-drying, low-odour solution, ideal for both radiators and appliances. Note that this product is not suitable for oil-filled electric radiators.
All features
| Colour | Grey |
|---|---|
| Brand | Rustins |
Extended Product Information
FAQs
How long does it take for the paint to dry?
The paint is touch dry in approximately 30 minutes.
What type of finish is available?
The paint is available in gloss and satin finishes.
Can I use this paint on oil-filled electric radiators?
No, this paint is not suitable for use on oil-filled electric radiators.
How should I clean the brushes?
Clean brushes with water immediately after use.
What surfaces can I use this paint on?
This paint is suitable for use on radiators, fridges, and white appliances.
How many coats should I apply?
Two coats are recommended for full coverage.
What sizes is this product available in?
It is available in 250ml, 500ml and 1Ltr sizes.
Troubleshooting
Paint is not drying properly.
Ensure adequate ventilation and that the surface is clean and free of contaminants. Check the room temperature and humidity.
Paint is peeling or flaking.
Ensure proper surface preparation, including cleaning and sanding. Apply a primer if necessary.
Brush marks are visible.
Apply thin, even coats, and avoid over-brushing. Use a high-quality brush for a smoother finish.
Pros and Cons
Pros
- Fast drying time saves time and allows for quicker project completion.
- Low odour makes it more user-friendly.
- Water-based formula simplifies cleanup.
- Heat resistance protects the painted surface.
- Available in multiple sizes and finishes.
Cons
- Not suitable for oil-filled electric radiators.
- Requires proper surface preparation for optimal results.
- Coverage may vary depending on the surface and application method.
Setup, Compatibility & Care
- Surface Preparation: Ensure the surface is clean, dry, and free from rust, grease, and loose paint. Lightly sand the surface to create a key.
- Application: Stir the paint thoroughly before use. Apply a thin, even coat using a brush. Two coats are recommended for full coverage, allowing 30 minutes drying time between coats.
- Cleaning: Clean brushes with water immediately after use.
- Compatibility: Suitable for use on most metal surfaces. Not recommended for oil-filled electric radiators.