Shopping.co.uk

Cuprinol Ducksback Shed & Fence Treatment 5L - Black

Not AvailableCuprinol Ducksback Shed & Fence Treatment 5L - Black
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available

An advanced, wax enriched and non-drip formulation, that colours and weatherproofs rough sawn timb...

Currently unavailable

Colour
BlackBrownGoldGreenGreySilver

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

The Cuprinol Ducksback Shed and Fence Treatment 5L - Black is designed for homeowners and gardeners seeking to protect and enhance their rough-sawn garden timber structures. Its key win is providing up to 5 years of weatherproofing and a stylish black finish, transforming outdoor features. However, it is specifically formulated for rough-sawn wood and not suitable for smooth timber surfaces.

All features

ColourBlack
Model Part Number5244557
BrandCuprinol

Extended Product Information

FAQs

How many coats of Cuprinol Ducksback are needed?

For optimal colour, weather protection, and longevity, 2-3 coats are recommended.

How long does Cuprinol Ducksback provide protection?

This treatment offers up to 5 years of weather protection for your rough-sawn timber structures.

Can I use this product on smooth wood?

No, Cuprinol Ducksback is specifically designed for rough-sawn timber and is not recommended for smooth wood surfaces.

Is it safe to use around plants and pets?

Yes, once dry, Cuprinol Ducksback has a low odour and is safe for use around plants and pets.

What is the coverage area for a 5L tin?

A 5L tin covers up to 24m2 with a single coat. Actual coverage may vary depending on timber porosity.

How quickly does it dry and when can I re-apply?

It is showerproof after just one hour. You can re-apply the next coat within 2-4 hours, but ensure recoating happens within 2-3 days of the previous coat for best results.

Troubleshooting

Uneven colour or patchy finish.

Ensure the product is thoroughly stirred before and during use. Apply evenly along the grain, and make sure to apply 2-3 coats for uniform coverage and depth.

Longer drying time than expected.

Check the weather conditions. High humidity or low temperatures can extend drying times. Ensure coats are applied thinly and allow adequate ventilation. Avoid application in damp or cold conditions.

Product not repelling water effectively after application.

Verify that 2-3 coats have been applied as recommended. The wax-enriched formula needs sufficient layers to build up its water-repelling properties. Ensure the surface was clean and dry before application.

Paint not adhering properly or peeling.

Ensure the timber surface was clean, dry, and free from loose material, grease, or previous coatings that could prevent adhesion. This product is for rough-sawn timber; adhesion on smooth wood may be poor.

Difficulty cleaning application tools.

Clean brushes and other equipment immediately after use with warm water and detergent. Do not allow the product to dry on tools.

Pros and Cons

Pros

  • Long-lasting Protection: Offers up to 5 years of weatherproofing.
  • Easy Application: Non-drip formula simplifies the painting process.
  • Fast Turnaround: Quick-drying and showerproof within an hour.
  • Safe for Environment: Low odour and safe for plants and pets.
  • Enhanced Aesthetic: Provides a modern, vivid black colour.
  • Water Repellent: Wax-enriched to effectively repel water.

Cons

  • Specific Surface Requirement: Not recommended for smooth wood surfaces.
  • Multiple Coats Needed: Requires 2-3 coats for optimal performance and colour.
  • Recoat Window: Requires recoating within 2-3 days of the previous coat, which might necessitate completing the project quickly.

Setup, Compatibility & Care

Setup & Application Instructions

  1. Preparation: Ensure the rough-sawn timber surface is clean, dry, and free from loose material, dirt, or mildew. For best results, use a stiff brush to remove any loose particles.
  2. Stirring: Thoroughly stir the contents of the 5L tin before you begin and periodically during application to ensure the colour and wax are evenly distributed.
  3. Application: Apply the treatment along the grain using a brush. The non-drip formula makes application straightforward. Avoid applying in direct hot sun or if rain is imminent.
  4. Coats: Apply 2-3 coats for optimal colour depth, weather protection, and longevity.
  5. Drying & Recoating: The product is showerproof in 1 hour. Allow 2-4 hours between coats. It is crucial to apply subsequent coats within 2-3 days of the previous coat to ensure proper adhesion and performance.
  6. Coverage: A 5-liter tin covers approximately 24m2 with a single coat. Actual coverage may vary depending on the porosity of the timber and the number of coats applied.

Compatibility

  • Suitable Surfaces: Exclusively designed for rough-sawn timber such as sheds, fences, trellis-work, and pergolas.
  • Not Recommended For: Smooth or planed timber surfaces.

Care

  • Cleaning Tools: Clean brushes and equipment with water immediately after use.
  • Storage: Store the tin in a cool, dry place, protected from frost. Ensure the lid is tightly sealed.
  • Maintenance: Regularly inspect treated timber for signs of wear. Reapply a maintenance coat if necessary, following the same preparation and application steps.