Bedec Barn Paint Satin 2.5L - White

Extremely tough and durable acrylic paint. Covers a number of exterior substrates including galvan...

Currently unavailable

Colour

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

This guide is for anyone looking to protect and beautify their barns, outbuildings, sheds, and fencing with a durable, long-lasting paint. The key benefit of Bedec Barn Paint is its exceptional durability and resistance to the elements, providing excellent color retention and preventing issues like rot and algae build-up. Keep in mind that proper surface preparation is essential for optimal results. This guide will provide you with all the information you need to successfully apply and maintain your Bedec Barn Paint.

All features

ColourWhite
Model Part NumberBEDE2AV0002/40
BrandBedec

Extended Product Information

FAQs

What surfaces can I apply Bedec Barn Paint to?

Bedec Barn Paint can be applied to wood, galvanised steel, plastic, concrete, brick, cladding, and previously painted surfaces.

How many coats of paint are needed?

Two coats are recommended for optimal performance and coverage.

How long does it take for the paint to dry?

The paint is touch-dry in 2-4 hours and fully recoatable in 4 hours.

How much area will one 2.5L tin cover?

A 2.5L tin provides up to 37.5m² coverage.

Can I apply Bedec Barn Paint by spray?

Yes, Bedec Barn Paint can be applied by brush, roller, or spray.

Is Bedec Barn Paint environmentally friendly?

Yes, it is water-based and low in VOCs.

How do I clean the paint brushes and rollers?

Clean tools with water immediately after use.

What colors are available?

Bedec Barn Paint is available in various colors, including white, black, green, brown, grey, and blue.

Troubleshooting

Paint is peeling or flaking

Ensure the surface was properly prepared and primed. Remove loose paint and apply a new coat, making sure the surface is clean and dry before application.

Paint is not adhering properly

Ensure the surface is clean, dry, and free from contaminants. Prime bare surfaces before applying the paint.

Poor coverage

Apply a second coat of paint. Ensure the paint is stirred well before application.

Algae or mold growth on painted surface

Clean the surface with a suitable mold and algae remover. Ensure proper ventilation and address any sources of moisture.

Pros and Cons

Pros

  • Long-lasting protection against weather and the elements.
  • Suitable for a wide range of surfaces.
  • Excellent color retention and resistance to cracking.
  • Easy to apply using various methods.
  • Eco-friendly, water-based formula.

Cons

  • Requires proper surface preparation for optimal adhesion.
  • Coverage is approximately 13-15m² per litre, so accurate calculations are needed to avoid running out.
  • May require multiple coats for full coverage, depending on the surface and existing color.

Setup, Compatibility & Care

  1. Surface Preparation: The surface must be clean, dry, and free from loose paint, dirt, grease, and algae. Remove any existing flaking paint and fill any cracks or holes.
  2. Priming: If painting bare wood or metal, prime the surface with an appropriate primer for optimal adhesion. For previously painted surfaces, ensure the existing paint is sound and well-adhered.
  3. Application: Stir the paint thoroughly before use. Apply two coats of Bedec Barn Paint, allowing 4 hours between coats. The paint can be applied by brush, roller, or spray.
  4. Drying: The paint is touch-dry in 2-4 hours and fully recoatable in 4 hours.
  5. Compatibility: Bedec Barn Paint is compatible with a wide range of exterior surfaces, including wood, metal, plastic, and concrete. It is also compatible with previously painted surfaces.
  6. Care: Clean tools with water immediately after use. Avoid painting in extreme temperatures or when rain is expected. Store the paint in a cool, dry place and ensure the lid is sealed tightly when not in use.
  • Ensure that the application is done within the temperature range as mentioned in the product information.
  • Make sure to follow the safety guidelines.