Bedec Barn Paint - Dark Green - 2.5L
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This durable, water-based Bedec Barn Paint in Dark Green is ideal for protecting and enhancing exterior structures like barns, outbuildings, and industrial buildings. Its key benefit is superior resistance to cracking, blistering, and flaking, offering excellent colour retention. A potential caveat is its self-priming nature, which may still benefit from a primer on certain challenging surfaces for optimal adhesion.
All features
| Colour | Green |
|---|---|
| Model Part Number | BEDE2AK0095/40 |
| Brand | Bedec |
Extended Product Information
FAQs
Is Bedec Barn Paint suitable for metal surfaces?
Yes, Bedec Barn Paint is suitable for metal surfaces, provided they are clean, dry, and free from rust. Lightly abrading the surface and applying a suitable metal primer first can enhance adhesion and durability.
Can I use this paint indoors?
Yes, the water-based, low-odour formula makes it suitable for interior use on various surfaces, though it is primarily designed for exterior applications.
How many coats of paint do I need?
Two coats are generally recommended for optimal protection and a uniform finish. A third coat may be beneficial on highly porous surfaces or for achieving a deeper color.
What is the drying time?
Drying times can vary based on temperature and humidity. Typically, it is touch dry within 1-2 hours and recoatable after 4-6 hours. Ensure adequate ventilation.
How do I clean my brushes after use?
Clean brushes and other equipment immediately after use with water. Dried paint can be more difficult to remove.
Does this paint prevent rust?
While the paint provides a protective barrier, it is not a rust converter or inhibitor. For rusted metal surfaces, it's recommended to treat the rust first and then apply a suitable primer before using the Barn Paint.
What surfaces can this paint be applied to?
It can be applied to wood, metal, primed plaster, concrete, and brick, among other suitable exterior substrates.
Troubleshooting
Paint not adhering well
Ensure the surface was properly cleaned and free from contaminants. Roughen glossy surfaces. Consider using a suitable primer if the surface is very porous or difficult.
Uneven finish or brush marks visible
Ensure paint is thoroughly stirred. Apply in thin, even coats, working with the grain of the wood. Avoid over-brushing. Allow adequate drying time between coats.
Paint appears too thick
In very cold conditions, paint may thicken. Try applying in a warmer environment. If necessary, a very small amount of water may be added, but avoid over-thinning.
Color appears different when dry
Color may appear slightly different when wet compared to dry. Allow paint to dry completely before assessing the final color. Ensure consistent application thickness.
Pros and Cons
Pros
- Offers robust protection against weather and wear.
- Simplifies the application process due to its self-priming quality.
- Maintains aesthetic appeal with excellent colorfastness.
- Suitable for a wide range of outdoor and some indoor applications.
- Environmentally friendlier with low odor and water-based formulation.
Cons
- May require a dedicated primer on particularly problematic or porous surfaces for best results.
- Drying times can be affected by environmental humidity and temperature.
- Satin finish may not be preferred for all aesthetic requirements.
- Not suitable for direct immersion in water or constantly wet surfaces.
Setup, Compatibility & Care
Preparation: Ensure surfaces are clean, dry, and free from grease, dirt, and loose material. Lightly abrade glossy surfaces to improve adhesion. For optimal results on bare wood or metal, or if the surface is particularly porous or stained, consider using a suitable primer.
Application: Apply with a brush or roller. Stir the paint thoroughly before use. Apply in well-ventilated conditions. Two coats are recommended for best protection and finish. Allow adequate drying time between coats.
Compatibility: Suitable for use on a wide range of substrates including wood, metal, primed plaster, concrete, and brick. Not recommended for use on plastics or surfaces that will be submerged in water.
Care: Clean brushes and equipment immediately after use with water. For maintenance, wash surfaces with mild detergent and water. Avoid abrasive cleaners.