Johnstone's Wall & Ceiling Natural Sage Matt Paint - 2.5L

Johnstone's Matt Emulsion is a high-quality paint designed for use on walls and ceilings. It has a...

Currently unavailable

Colour

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

This Johnstone's Matt Emulsion in Natural Sage is designed for homeowners and professional decorators seeking a high-quality, sophisticated finish for interior walls and ceilings. Its key benefit is providing rich, concentrated color with excellent coverage and a smooth, non-reflective matte appearance. A potential caveat is that like most matt paints, it may be less scrubbable than vinyl or silk finishes, requiring careful cleaning.

All features

ColourGreen
Model Part Number5010426779447
BrandJohnstone's

Extended Product Information

FAQs

What surfaces can I use this paint on?

This Johnstone's Matt Emulsion is designed for interior walls and ceilings.

How many coats of paint do I need?

Coverage can vary, but typically two coats are recommended for best results. Excellent coverage may mean one coat is sufficient over a similar color.

How long does the paint take to dry?

The paint is quick drying. Drying times between coats are usually a few hours, but always check the specific instructions on the paint can.

Can I use this paint in a bathroom?

This is a standard matt emulsion. For high-moisture areas like bathrooms, a vinyl matt or silk emulsion specifically designed for such environments is usually recommended for better durability and moisture resistance.

How do I clean application tools?

Clean brushes, rollers, and any other equipment with water immediately after use.

What is the best way to clean the painted wall?

Wipe gently with a damp, soft cloth. Avoid using abrasive cleaners or scrubbing aggressively, as this can damage the matt finish.

Does this paint have a strong odor?

Most modern emulsions have low VOCs and a minimal odor, but it's always best to ensure good ventilation during application and drying.

Troubleshooting

Paint appears streaky or uneven

Ensure the paint was stirred thoroughly. Apply in consistent, overlapping strokes. Check for surface imperfections that may be absorbing paint unevenly.

Poor adhesion or peeling

Surface preparation may have been inadequate. Ensure the surface was clean, dry, and properly primed if necessary. Remove any loose paint and reapply.

Color looks different when dry

Allow the paint to dry completely. Color can appear different when wet versus dry. If significantly different, a test patch in a discreet area might be advisable for future projects.

Difficult to clean marks

Matt emulsions are less scrubbable than gloss finishes. For light marks, use a slightly damp cloth and gentle pressure. Avoid harsh chemicals or vigorous scrubbing.

Pros and Cons

Pros

  • Achieves a modern, sophisticated matte look.
  • Good coverage reduces the amount of paint needed.
  • Quick drying time speeds up decorating projects.
  • Easy to apply for both DIYers and professionals.
  • Available in a distinctive Natural Sage color.

Cons

  • Matt finishes can be less resistant to heavy scrubbing than silk or vinyl paints.
  • May show slight variations in sheen if applied unevenly.
  • Requires adequate preparation of surfaces for best results.

Setup, Compatibility & Care

Preparation: Ensure surfaces are clean, dry, and free from dust, grease, and old wallpaper. Fill any cracks or holes and sand smooth. Apply a suitable primer if painting over dark colors or bare plaster.

Application: Stir the paint thoroughly before use. Apply with a brush or roller in a criss-cross pattern for even coverage. Allow adequate drying time between coats as per the manufacturer's instructions.

Compatibility: Suitable for interior walls and ceilings. Not recommended for high-moisture areas like bathrooms or kitchens unless specifically formulated for it (check product details).

Care: Clean brushes and rollers immediately after use with water. To maintain the finish, wipe surfaces gently with a damp, soft cloth. Avoid abrasive cleaners or excessive rubbing.