Johnstone's Walls & Ceilings Silk Emulsion Paint - Rich Red

Rejuvenate your home and give your rooms a fresh new look with this Johnstone's Silk Emulsion Pain...

Currently unavailable

Colour

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

This guide helps you understand and use Johnstone's Walls & Ceilings Rich Red Silk Emulsion Paint. It's ideal for homeowners looking to refresh their walls and ceilings with a vibrant, durable finish. This paint offers a high sheen with light-reflecting properties, but it's important to note that the final color appearance may vary slightly depending on the existing wall color and lighting conditions. Key features include a silky smooth coverage, scrub resistance, and a low odour formula.

All features

ColourRed
BrandJohnstone's

Extended Product Information

FAQs

How much paint will I need?

Coverage is typically around 13 square meters per liter, but this can vary depending on the surface porosity. Calculate the area to be painted and purchase sufficient paint, plus a little extra for touch-ups.

Can I use this paint in a bathroom?

While it's suitable for most interior spaces, consider using a paint specifically designed for bathrooms due to the higher moisture levels.

How long does it take for the paint to dry?

The paint is quick-drying, often dry to the touch in 2-4 hours. However, allow at least 4 hours between coats.

What tools do I need to apply the paint?

You'll need a brush or roller, a paint tray, and possibly a paint kettle or container for pouring. Also, consider painter's tape to protect trim and edges.

How do I clean my brushes and rollers?

Clean brushes and rollers immediately after use with warm, soapy water. Rinse thoroughly and allow them to dry completely.

Can I apply this paint over wallpaper?

It is generally not recommended to paint over wallpaper as the paint may not adhere well. It's best to remove the wallpaper first.

Is this paint washable?

Yes, once fully cured, the paint is scrub-resistant, allowing for easy cleaning with a damp cloth and mild detergent.

Troubleshooting

Paint is not covering the surface evenly.

Ensure the surface is properly prepared. Apply a second coat, allowing the first to dry completely.

Paint appears to be running or dripping.

Apply thinner coats and avoid overloading the brush or roller. Address any sags immediately.

The finish is not as glossy as expected.

Ensure the paint is stirred thoroughly before use. Check the application technique and consider using a high-quality roller or brush.

Paint is flaking or peeling.

Ensure the surface is properly prepared, remove any loose paint or wallpaper, and apply primer if necessary.

Pros and Cons

Pros

  • Provides a rich, vibrant color.
  • Offers a high sheen finish for a visually appealing look.
  • Durable and scrub resistant, extending the life of your paint job.
  • Low odour for a more comfortable application.
  • Quick-drying formula saves time.
  • Easy to apply, suitable for various skill levels.

Cons

  • Color appearance can be affected by existing wall color.
  • May require multiple coats for optimal coverage, depending on the base color.
  • High sheen might highlight imperfections on uneven surfaces.
  • Requires proper surface preparation for best results.
  • Touch-ups may be noticeable if not applied carefully.

Setup, Compatibility & Care

Setup

  1. Preparation: Clean the surface to remove dirt, grease, and loose paint. Fill any cracks or holes with appropriate filler and sand smooth.
  2. Priming: If painting over a previously painted surface, priming is usually not necessary. However, if painting over bare plaster or a significantly different color, a primer is recommended.
  3. Application: Stir the paint thoroughly before use. Apply the paint evenly using a brush or roller.

Compatibility

  • Suitable for use on most interior wall and ceiling surfaces, including plaster, drywall, and previously painted surfaces.
  • Ensure compatibility with any existing coatings by testing in an inconspicuous area.

Care

  • Allow the paint to fully cure (as per manufacturer's instructions) before cleaning.
  • Clean the painted surfaces with a damp cloth and mild detergent. Avoid abrasive cleaners.
  • For stubborn marks, gently scrub the surface.