Pro-Ject Debut Evo 2 Turntable - Satin Gold Yellow
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Pro-Ject Debut EVO 2 Turntable in Satin Gold Yellow is designed for audiophiles and vinyl enthusiasts seeking superior sound quality and precision in their listening experience. Its key benefit lies in delivering a rich, detailed audio experience thanks to its advanced components like the Pick it MM EVO cartridge and the TPE-damped platter. However, users should note that proper setup and calibration are essential to achieve optimal performance. This guide will help you understand and utilize the Debut EVO 2 to its fullest potential.
All features
| Colour | Gold |
|---|---|
| Model Part Number | DEBUT EVO 2 Satin Gold Yellow |
| Brand | Pro-Ject |
Extended Product Information
FAQs
What is the lifespan of the stylus?
The stylus typically lasts for 500-1000 hours of play. Regular cleaning and proper handling will extend its life.
How do I change the speed?
Use the electronic speed switch located on the bottom of the turntable to switch between 33 and 45 RPM.
Can I upgrade the cartridge?
Yes, the Debut EVO 2 has a removable cartridge. You can upgrade to a higher-quality MM cartridge.
How do I clean my vinyl records?
Use a record cleaning brush and a cleaning solution designed for vinyl records. Always clean records before playing them.
What kind of amplifier do I need?
You need an amplifier with a phono input (MM) or a phono preamplifier. If your amplifier doesn’t have a phono input, you’ll need to use a separate phono preamplifier.
What is the warranty?
The Pro-Ject Debut EVO 2 comes with a two-year warranty against manufacturing defects.
Can I play 78 RPM records?
No, the Debut EVO 2 only supports 33 and 45 RPM records. It is not compatible with 78 RPM records.
Troubleshooting
Turntable doesn't turn on.
Check the power connection and ensure the power adapter is properly plugged in. Verify that the power outlet is working.
Sound is distorted.
Check the stylus and replace if necessary. Ensure the tonearm is properly balanced and the anti-skating is correctly set. Check the phono cable connections.
Humming noise present.
Check grounding connections. Ensure the turntable is not placed near any sources of interference (e.g., power cables, Wi-Fi routers).
Speed is incorrect.
Check that the belt is properly installed on the correct speed pulley. Check the speed switch.
One channel is not working.
Check the RCA connections. Try swapping the RCA cables to the amplifier to isolate the issue. Check the cartridge connections.
Pros and Cons
Pros
- High-quality components for superior sound reproduction.
- Precise and stable tracking due to the low-friction tonearm bearing.
- Easy switching between speeds with electronic speed change.
- Stylish design with a satin gold yellow finish.
- Includes a premium phono cable for optimal connection.
- Robust construction for longevity.
Cons
- Requires careful setup and calibration for optimal performance.
- May require additional equipment like a phono preamplifier depending on your setup.
- The initial setup process might be a bit complex for beginners.
- Dust cover can attract dust and require frequent cleaning.
- Limited to two speeds (33 and 45 RPM).
- May be considered expensive compared to entry-level turntables.
Setup, Compatibility & Care
Setup
- Carefully unpack the turntable and its components.
- Attach the platter and belt to the motor pulley.
- Install and balance the tonearm.
- Connect the included phono cable to your amplifier or phono preamplifier.
- Adjust the anti-skating setting.
Compatibility
The Debut EVO 2 is compatible with most amplifiers that have a phono input or can be connected to a phono preamplifier. Ensure your amplifier or preamplifier is compatible with moving magnet (MM) cartridges. The turntable is designed to work with standard RCA cables; upgrade to a higher quality cable for better sound.
Care
- Dusting: Regularly dust the turntable and stylus using a soft brush or cloth.
- Cleaning the Stylus: Use a stylus brush to gently clean the stylus from back to front.
- Cleaning the Platter: Clean the platter with a microfiber cloth to prevent static buildup.
- Storage: Store vinyl records in a vertical position to prevent warping.