Pro-Ject Debut EVO 2 Belt Driven Turntable - Brown
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Pro-Ject Debut EVO 2 Turntable is designed for audiophiles and vinyl enthusiasts seeking superior sound quality. This turntable offers exceptional audio fidelity with its high-quality components and innovative design. Note that while setup is straightforward, achieving optimal performance may require some adjustments based on your specific audio system.
All features
| Colour | Brown |
|---|---|
| Model Part Number | 9865005 |
| Brand | Pro-Ject |
Extended Product Information
FAQs
How do I clean the stylus?
Use a soft stylus brush, brushing gently from back to front. Avoid using any liquids.
What kind of phono pre-amp do I need?
You need either an amplifier with a built-in phono stage or an external phono pre-amp.
How often should I replace the stylus?
The stylus should be replaced every 300-500 hours of use, or sooner if you notice a decline in sound quality.
Can I upgrade the cartridge?
Yes, the Debut EVO 2 is designed to accommodate various cartridges, but ensure compatibility with the tonearm.
How do I change the speed from 33 to 45 RPM?
Use the electronic speed change switch located on the bottom of the turntable.
What is the purpose of the ground wire?
The ground wire helps to eliminate hum and noise by connecting the turntable to the amplifier's grounding system.
How do I clean the turntable?
Use a slightly damp cloth to wipe down the plinth and dust cover. Use a soft brush for the tonearm and platter. Avoid using harsh chemicals.
Troubleshooting
No sound or very quiet sound.
Check all cable connections, including the RCA cables and ground wire. Ensure your amplifier is set to the correct input and volume.
Humming or buzzing sound.
Make sure the ground wire is securely connected. Check for any interference from nearby electrical devices. Try a different power outlet.
Distorted sound.
Check the stylus for dust or damage and clean it. Ensure the tracking force and anti-skating are correctly set. Inspect the record for damage.
Speed issues (too fast or slow).
Check the belt's condition and ensure it is correctly placed on the motor pulley and platter. Verify the speed setting is correct.
Turntable won't power on.
Check the power adapter connection and ensure it is plugged into a working outlet. Check the power switch on the turntable.
Pros and Cons
Pros
- Delivers exceptional sound quality with a dynamic and clear audio experience.
- Features a heavy, TPE-damped aluminum platter, which reduces unwanted resonances and wow and flutter.
- Offers a low-friction precision tonearm bearing for stable and accurate tracking.
- Includes a high-quality Pick it MM EVO cartridge, pre-adjusted for optimal performance.
- Features an electronic speed change for ease of use.
- Comes with a premium phono cable for lossless signal transmission.
Cons
- Requires careful setup and adjustment for optimal performance.
- External phono pre-amp is required if your receiver does not have one built-in.
- Dust cover, while included, may need regular cleaning to maintain its clarity.
- The initial setup may take some time for users not familiar with turntables.
- Upgrading to True Balanced connection requires additional components.
- May require occasional cartridge alignment adjustments.
Setup, Compatibility & Care
- Unpacking and Assembly: Carefully unpack all components and refer to the included manual for assembly instructions. Ensure the turntable is placed on a stable, level surface.
- Cartridge Setup: The Pick it MM EVO cartridge comes pre-adjusted, but it may require fine-tuning. Follow the manual's instructions for setting the tracking force and anti-skating.
- Connecting to Your System: Connect the RCA cables to your amplifier or phono pre-amp. Ensure the ground wire is properly connected to minimize hum. If your amplifier doesn't have a phono input, you'll need an external phono pre-amp.
- Speed Selection: Use the switch on the bottom of the turntable to select between 33 and 45 RPM.
- Compatibility:
- Amplifiers: Compatible with amplifiers that have a built-in phono stage or with an external phono pre-amp.
- Speakers: Compatible with powered speakers or any speakers connected to your amplifier.
- Care:
- Cleaning: Use a soft, anti-static brush to clean the stylus and records before each use. Wipe the turntable with a slightly damp cloth to remove dust.
- Dust Cover: Keep the dust cover closed when the turntable is not in use to protect the components from dust and debris.
- Record Care: Handle records by their edges to avoid fingerprints. Store records vertically in a cool, dry place.
- Stylus Replacement: The stylus will need to be replaced after extended use. Consult the manual for the replacement schedule.