Corsair Vengeance RGB DDR5 RAM 32GB (2x16GB) 6000MHz C36 White
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Corsair Vengeance RGB 32GB DDR5 6000MHz memory kit is designed for PC enthusiasts and gamers who demand high-speed performance and aesthetic customization for Intel 700-series builds. This 32GB dual-channel kit provides the necessary bandwidth for complex multitasking, content creation, and high-frame-rate gaming, while the integrated ten-zone RGB lighting adds a premium visual touch to any white-themed setup. Users should note that this DDR5 kit requires a compatible motherboard and may necessitate BIOS adjustments to achieve the advertised 6000MHz speeds via XMP 3.0.
All features
| Colour | White |
|---|---|
| Series | RGB |
| Model Part Number | CMH32GX5M2E6000C36W |
| Brand | Corsair |
Extended Product Information
FAQs
Is this memory compatible with AMD systems?
This specific kit is optimized for Intel 700 series motherboards. While it may function in some AMD systems, look for kits explicitly labeled 'AMD Expo' for best results on that platform.
What happens if I do not enable XMP?
The memory will operate at a standard, slower JEDEC frequency, meaning you will not get the full performance advertised by the 6000MHz rating.
Does this RAM support ECC?
Yes, this DDR5 memory features on-die ECC to help ensure data integrity and system stability.
How do I control the RGB lighting?
You can customize the ten-zone lighting effects using Corsair's iCUE software, which allows for syncing with other compatible Corsair components.
Can I mix this with other RAM sticks?
Mixing memory kits is not recommended as it can lead to compatibility issues, system instability, and failure to reach advertised speeds.
What is the physical height of these modules?
The Vengeance RGB modules are designed to fit most air-cooled and liquid-cooled systems, but always verify your CPU cooler clearance to prevent physical interference.
Troubleshooting
System fails to boot or BIOS reports memory errors
Ensure the RAM sticks are fully clicked into the slots. Try reseating them one at a time to identify if a single module is faulty.
RAM is not running at 6000MHz speed
Access the motherboard BIOS and ensure the XMP 3.0 profile is enabled. Without this, the system may run at a lower JEDEC default speed.
RGB lighting is not syncing with motherboard software
Ensure that the latest version of Corsair iCUE software is installed and that the motherboard BIOS is up to date.
Pros and Cons
Pros
- High 6000MHz speed for improved system responsiveness
- Stunning ten-zone addressable RGB lighting
- Sleek white heat spreader aesthetics
- Supports XMP 3.0 for simple performance tuning
- Reliable dual-channel architecture
Cons
- Requires a DDR5-compatible motherboard
- May require manual XMP activation in BIOS to reach 6000MHz
- Higher voltage (1.4V) compared to standard DDR5 modules
Setup, Compatibility & Care
To install this memory, power down your PC, discharge any static electricity, and insert the modules into the DIMM slots—typically slots 2 and 4 on most motherboards for dual-channel operation.
Compatibility
- Platform: Designed specifically for DDR5-supporting motherboards, particularly the Intel 700 series.
- BIOS Configuration: Once installed, enter your motherboard BIOS and enable the `XMP 3.0` profile to ensure the RAM operates at its full 6000MHz speed, otherwise, it may default to a lower standard frequency.
Care
- Cleaning: Use compressed air to gently remove dust from the heat spreader fins to maintain thermal efficiency.
- Avoid Static: Always handle the sticks by the edges, avoiding direct contact with the gold pins.