Corsair Vengeance - 16 GB DDR5 5200 MHz
Not Available
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Corsair Vengeance 16GB DDR5 memory module is designed for performance-focused PC builders and gamers who require faster data processing and improved multi-tasking capabilities. It provides a significant bandwidth upgrade over DDR4 memory, making it an excellent choice for modern content creation and gaming rigs; however, users should ensure their motherboard specifically supports DDR5 technology before purchase as it is not backward compatible with DDR4 slots.
All features
| Colour | Black |
|---|---|
| Series | Vengeance |
| Model Part Number | CMK16GX5M1B5200C40 |
| Brand | Corsair |
Extended Product Information
FAQs
Is this RAM compatible with my DDR4 motherboard?
No. DDR5 memory uses a different physical connector and pin layout than DDR4 and is not backward compatible.
Can I use this with an AMD processor?
While the module is optimized for Intel DDR5 motherboards, it may function in some AMD systems, but you should verify your motherboard's Qualified Vendor List (QVL).
Do I need the iCUE software to use this RAM?
No, the RAM will function perfectly as standard memory without the software. iCUE is only required if you wish to manage advanced custom XMP profiles or voltage settings.
What is the CAS latency of this module?
This specific model has a CAS latency of 40.
Does this module support ECC?
No, this module does not feature Error Correction Code (ECC) memory.
How long is the warranty?
Corsair provides a limited lifetime warranty for this product.
Troubleshooting
System fails to boot or BIOS does not recognize RAM
Ensure the RAM is fully seated in the slot until the retention clips click into place, and try a different DIMM slot if the issue persists.
Memory is running at lower than 5200MHz speed
Enter the BIOS/UEFI settings and ensure the Intel XMP 3.0 profile is enabled; otherwise, the system will default to standard JEDEC speeds.
System instability after overclocking
Reset the BIOS to default settings or lower the custom XMP frequency in iCUE to stabilize the system.
Pros and Cons
Pros
- Improved multitasking speed for heavy workloads
- Stable overclocking via iCUE integration
- Low-profile design avoids cooler interference
- Intel XMP 3.0 support for easy setup
- Lifetime limited warranty
Cons
- Not compatible with DDR4 motherboard slots
- Single stick configuration (1 x 16GB) requires a second module for true dual-channel parity
- CAS latency of 40 is standard rather than low-latency
Setup, Compatibility & Care
Installing this memory is a straightforward process, but requires careful attention to system requirements. Ensure your motherboard features a 288-pin DIMM slot specifically designated for DDR5 memory—it will not fit into older DDR4-only boards.
- Installation: With the PC powered off and unplugged, insert the module into the primary DIMM slot (consult your motherboard manual for the optimal slot for single-module configurations).
- Configuration: Upon first boot, enter the BIOS/UEFI settings and enable the Intel XMP 3.0 profile to ensure the RAM runs at its rated 5200MHz speed rather than the slower default SPD speed.
- Care: The aluminum heatspreader is durable, but avoid applying physical pressure to the top of the heatspreader during installation. Ensure the system case has adequate airflow to assist the passive cooling.