Farrow & Ball Full Gloss Paint 2.5L - Shaded White
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
Farrow & Ball Full Gloss Paint is designed for homeowners seeking a durable, high-shine finish for interior and exterior surfaces. Its key benefit is a glamorous, resilient coating that protects against wear and tear for up to six years. A potential caveat is its very high gloss level, which can highlight imperfections on surfaces.
All features
| Colour | Grey |
|---|---|
| Model Part Number | 201 |
| Brand | Farrow & Ball |
Extended Product Information
FAQs
What surfaces can I use Farrow & Ball Full Gloss Paint on?
This paint is suitable for interior and exterior wood, metal, walls, and ceilings.
How durable is this paint?
It is extremely durable and designed to resist water damage, flaking, peeling, and fading for up to six years.
What is the shine level of Full Gloss?
Full Gloss has a shine level of 95%, offering a super high gloss finish.
Is this paint suitable for kitchens and bathrooms?
Yes, its durability and washability make it a good choice for these areas, especially on trim and doors.
How do I clean my painted surfaces?
Gently wipe with a damp cloth and mild detergent. Avoid abrasive cleaners.
Can I use this paint over existing oil-based paint?
Yes, provided the surface is properly prepared by lightly sanding and cleaning. A suitable primer may also be necessary.
What is the drying time?
Drying times vary depending on conditions, but it is designed to dry relatively quickly. Refer to the product tin for specific guidance.
Troubleshooting
Paint is not adhering well
Ensure the surface was properly prepared, clean, and dry. Check that the correct primer was used for the surface material.
High gloss finish appears uneven or streaky
Ensure consistent application with even strokes. Avoid overworking the paint. Surface imperfections may be highlighted by the gloss; ensure thorough preparation.
Slow drying time
Drying times are dependent on temperature and humidity. Ensure adequate ventilation and avoid applying in very cold or damp conditions. Apply thinner coats.
Flaking or peeling after application
This is often due to poor surface preparation or inadequate priming. Re-prepare the surface and ensure proper adhesion for the next application.
Pros and Cons
Pros
- Provides a highly durable and long-lasting finish.
- Offers a luxurious, high-gloss aesthetic.
- Suitable for both indoor and outdoor applications.
- Water-based formula makes for easier cleanup.
- Resists common forms of paint degradation like flaking and peeling.
Cons
- The high gloss finish can emphasize surface imperfections.
- Requires careful surface preparation for optimal results.
- May not be suitable for users preferring a matte or satin finish.
- Drying time can vary significantly with temperature and humidity.
Setup, Compatibility & Care Instructions
Preparation: Ensure all surfaces are clean, dry, and free from dust, grease, and flaking paint. For previously painted surfaces, lightly sand and wipe clean. For bare wood or metal, apply an appropriate primer. Allow adequate drying time between coats as per manufacturer guidelines.
Compatibility: Suitable for interior and exterior wood, metal, walls, and ceilings. Not recommended for direct application on flexible surfaces or plastics. Always test in an inconspicuous area first.
Care: Clean brushes, rollers, and equipment immediately after use with water. For maintaining the painted surface, gently wipe with a damp cloth and mild detergent. Avoid abrasive cleaners or excessive scrubbing, which can dull the high-gloss finish.