Farrow & Ball Eggshell Paint - White - 750Ml

Modern Eggshell is Farrow & Ball’s toughest interior finish, adding colour and protection to wood,...

Currently unavailable

Colour

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

This guide is for DIY enthusiasts and homeowners seeking a durable and beautiful finish for interior wood, metal, and concrete surfaces. The Farrow & Ball Eggshell paint offers exceptional toughness and a sophisticated finish, suitable for high-traffic areas. A potential caveat is that specific color availability may vary across different finishes.

All features

ColourWhite
Model Part Number201
BrandFarrow & Ball

Extended Product Information

FAQs

What surfaces can Farrow & Ball Eggshell be used on?

Farrow & Ball Modern Eggshell is suitable for wood, metal, and concrete surfaces. This includes floors, skirting boards, doors, kitchen cabinets, furniture, and radiators.

Is this paint washable?

Yes, Farrow & Ball Modern Eggshell is highly durable and washable, making it easy to clean off marks and scuffs with mild soap and water.

What is the sheen level of Eggshell paint?

Modern Eggshell has a low sheen level, typically around 40-45%. It offers a sophisticated, subtle finish that is not highly reflective.

How many coats of Eggshell paint are typically needed?

For best results, two to three coats are generally recommended, especially when covering a dark or contrasting color. Proper surface preparation and priming are crucial.

Can I use this paint outdoors?

Farrow & Ball Modern Eggshell is designed for interior use only. It is not suitable for exterior applications.

What is the drying time for Modern Eggshell?

Drying times can vary, but typically it is touch dry in 2-4 hours and ready for a second coat after 4-6 hours. Full curing can take several days.

Does this paint have a strong odor?

Farrow & Ball paints are known for their low VOC content and generally have a milder odor compared to conventional paints. Ensure good ventilation during application and drying.

Troubleshooting

Paint is not adhering well

Ensure the surface was properly prepared, cleaned, and primed if necessary. Glossy surfaces should be lightly sanded before application.

Uneven finish or brush marks visible

Ensure the paint is thoroughly stirred. Apply thin, even coats, maintaining a wet edge to avoid lap marks. Use a high-quality brush or roller suitable for the paint type.

Color appears different than expected

Color can vary significantly depending on the lighting conditions and the undertones of the surface it's applied to. Test a small area in the intended location. Ensure you are using the correct finish for the intended color.

Paint seems too thick or difficult to apply

Stir the paint thoroughly. If necessary, thin slightly with water (usually no more than 5-10%) for optimal application, following manufacturer recommendations.

Pros and Cons

Pros

  • Extremely durable and hard-wearing
  • Suitable for a wide range of interior surfaces
  • Resistant to washing and scrubbing
  • Beautiful, low-sheen finish
  • Available in Farrow & Ball's unique color range

Cons

  • Higher price point compared to standard paints
  • May require multiple coats for optimal coverage
  • Longer drying time compared to some other finishes
  • Specific colors might be limited to certain finishes
  • Requires careful preparation of surfaces for best adhesion

Setup, Compatibility & Care

Surface Preparation: Ensure all surfaces are clean, dry, and free from dust, grease, and flaking paint. Lightly sand glossy surfaces to improve adhesion and wipe clean. Use an appropriate primer for bare wood, metal, or previously painted surfaces.

Compatibility: This paint is compatible with wood, metal, and concrete. It can be used on floors, doors, skirting boards, kitchen cabinets, furniture, and radiators.

Application: Stir thoroughly before use. Apply two or three coats using a good quality brush or roller. Allow adequate drying time between coats as per manufacturer's instructions.

Care: Clean up spills and brushes with warm soapy water. To clean painted surfaces, use a soft cloth with mild detergent and water. Avoid abrasive cleaners or scouring pads, which can damage the finish.