Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
This guide is for DIY enthusiasts and homeowners looking to refresh various surfaces with a durable and attractive finish. The Rust-Oleum Universal All Surface Spray Paint in Brown Hammered offers a unique textured effect with excellent adhesion and weather resistance, making it ideal for both indoor and outdoor projects. A key consideration is the specific surface preparation required for optimal results, and the 24-hour drying time.
| Colour | Brown |
|---|---|
| Model Part Number | AE0160016E8 |
| Brand | Rust-Oleum |
The paint is touch dry in approximately 1 hour, but requires 24 hours for full drying. Full hardness and maximum durability may take longer depending on conditions.
This product is designed for hard surfaces like wood, metal, and plastic. It is not recommended for use on fabric.
One 400ml can covers approximately 2 square meters per litre, which translates to roughly 0.8 square meters for a 400ml can, depending on application thickness.
This product is not specifically designed for high-heat applications. For items exposed to extreme temperatures, a specialized high-heat paint should be used.
Yes, provided the existing paint is sound and well-adhered. Clean the surface thoroughly and lightly sand any glossy areas to ensure maximum adhesion of the new coat.
It provides a distinctive textured hammered effect, giving a slightly raised, irregular pattern that adds depth and character to the surface.
Once fully cured, the painted surface can be cleaned with mild soap and water. Avoid using harsh chemicals or abrasive materials.
Shake the can more vigorously. If the nozzle is clogged, remove it and soak it in a suitable solvent (like mineral spirits), then clean with a fine pin and reattach. Ensure the can is held upright during spraying.
Ensure the surface was properly prepared. It must be clean, dry, and free from dust, grease, or rust. Lightly sanding glossy surfaces can improve adhesion. For some plastics, a primer may be necessary.
Apply paint in lighter, more numerous coats rather than one heavy coat. Maintain a consistent distance and speed while spraying. Remove any large drips carefully with a brush before they dry.
Ensure you are applying thin, even coats. Overlap each pass slightly. If needed, apply an additional coat after allowing the previous one to dry for at least an hour.
Setup:
Compatibility:
This paint is designed for use on a wide variety of surfaces including wood, metal, plastic, masonry, ceramic, and more. Always test on an inconspicuous area first, especially on plastics, to ensure compatibility and desired results.
Care:
Once fully cured (allow 24 hours for initial drying, longer for full hardness), the surface can be cleaned with mild soap and water. Avoid abrasive cleaners or solvents that could damage the finish. For exterior applications, regularly check for any signs of wear or damage and touch up as needed.
