Shopping.co.uk

Rust-Oleum Universal All Surface Spray Paint 400ml - Pure Gold

Not AvailableRust-Oleum Universal All Surface Spray Paint 400ml - Pure Gold
Not Available
Not Available
Not Available

Bring an upscale, modern look to all your projects with the Rust-Oleum Universal Metallic Spray Pa...

Currently unavailable

Colour
BeigeBlackBronzeBrownGoldGreenRedSilverWhite

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

This guide is for anyone looking to revitalize their projects with a premium metallic finish using Rust-Oleum Universal Metallic Spray Paint in Pure Gold. The paint provides superior coverage and durability on various surfaces, offering a beautiful, modern look. However, remember to apply multiple light coats for the best results. This guide covers key features, usage tips, and troubleshooting to help you achieve a stunning finish on your projects.

All features

ColourGold
Model Part NumberAE0160013E8
BrandRust-Oleum

Extended Product Information

FAQs

What surfaces can I use this spray paint on?

Rust-Oleum Universal Metallic Spray Paint is suitable for use on metal, wood, plastic, and more.

How many coats of paint are needed?

For best results, apply two or more light coats.

How long should I wait between coats?

Allow a few minutes between coats for the paint to dry slightly.

What is the coverage area of one can?

One can covers approximately 2m² per litre.

How do I clean up spills?

Clean up wet paint with a solvent like mineral spirits.

Is this paint suitable for outdoor use?

Yes, it is suitable for both interior and exterior environments.

How long does it take for the paint to dry?

Allow the paint to dry for at least 24 hours before handling.

Does it prevent rust?

Yes, it helps to prevent rust.

Troubleshooting

Paint is dripping or running.

Apply thinner coats and ensure the can is held the correct distance from the surface. Avoid spraying too much paint in one area.

Paint is not adhering properly.

Ensure the surface is clean, dry, and properly prepared. Lightly sand glossy surfaces to improve adhesion. Check surface compatibility.

Uneven finish or inconsistent color.

Shake the can well before use. Apply multiple light coats, allowing each coat to dry for a few minutes. Maintain a consistent spraying distance and motion.

Pros and Cons

Pros

  • Excellent coverage with the patented trigger system.
  • Suitable for both interior and exterior projects.
  • Provides a durable, chip-resistant finish.
  • Acts as a paint and primer in one, saving time.
  • Easy to apply with a back-and-forth motion.

Cons

  • Requires multiple light coats for optimal results.
  • Coverage area is approximately 2m² per litre, which may require multiple cans for larger projects.
  • Specific surface preparation is needed for the best adhesion.

Setup, Compatibility & Care

  1. Surface Preparation: Clean the surface thoroughly. Remove any loose paint, rust, or debris. Lightly sand glossy surfaces to improve adhesion.
  2. Application: Shake the can vigorously for one minute after the mixing ball begins to rattle. Hold the can 8-12 inches from the surface and spray in a steady, back-and-forth motion.
  3. Drying Time: Allow the paint to dry for at least 24 hours before handling.
  4. Compatibility: This paint is compatible with a wide range of surfaces including metal, wood, plastic, and more. Always test in an inconspicuous area first to ensure compatibility and desired results.
  5. Care: Clean up wet paint with a solvent like mineral spirits. Once dry, the surface can be cleaned with a damp cloth.