Extended Product Information
FAQs
How many coats of Johnstone's MY Colour paint do I need?
Typically, two coats are recommended for optimal colour depth and durability. However, very porous or dark surfaces may benefit from an additional coat or a suitable primer first.
What is the drying time between coats?
Please refer to the product label for specific drying times, but generally, allow 2-4 hours between coats for Johnstone's MY Colour paint.
Can I use this paint in bathrooms?
While durable, for areas with high humidity like bathrooms, a paint specifically formulated for moisture resistance and mildew prevention is often recommended. This paint is best for general living areas, hallways, and kitchens.
What does 'Low VOC' mean?
Low VOC (Volatile Organic Compounds) means the paint releases fewer harmful chemicals into the air during and after application. This contributes to better indoor air quality and makes it a safer choice for you and your family.
Do I need to use a primer with this paint?
A primer is highly recommended for new plaster, very porous surfaces, or when making a significant colour change to ensure optimal adhesion, even coverage, and a smooth finish. For previously painted, sound surfaces, it may not be strictly necessary, but can still improve results.
How do I clean painted surfaces?
Once the paint is fully cured (typically 7-14 days after final coat), you can gently wipe surfaces with a damp, soft cloth using a mild, non-abrasive detergent. Avoid harsh scrubbing or abrasive cleaners to preserve the matt finish.
Troubleshooting
Uneven or streaky finish
Ensure the surface was clean and properly prepared. Apply paint evenly with consistent pressure, avoiding overspreading. Use a high-quality roller or brush suitable for matt paint. Ensure adequate drying time between coats.
Poor coverage or colour inconsistency
Thoroughly stir the paint before and during application. Ensure the surface was properly primed, especially if painting over a much darker or very porous substrate. Apply two full, even coats, allowing sufficient drying time between applications.
Paint peeling or flaking
This often indicates poor surface preparation. Ensure surfaces are completely clean, dry, and free of loose material before painting. Scrape off any peeling paint, sand the area smooth, clean, and re-prime before repainting.
Pros & Cons ### Pros - Exceptional Durability: Withstands daily wear and tear, perfect for family rooms, hallways, and kitchens. - Rich, Lasting Colour: Intense Colour Technology ensures pigments remain vibrant and beautiful for longer. - Eco-Friendly: Low VOC content contributes to better indoor air quality. - Smooth Finish: Dries to a flawless, luxurious matt surface. - Easy Application: Designed for straightforward painting, suitable for DIY enthusiasts. - Versatile Use: Can be applied to a variety of interior surfaces beyond just walls. ### Cons - Surface Preparation is Key: Requires thorough cleaning and priming for optimal adhesion and finish. - Specific Colour Choice: This guide focuses on a single grey shade; other colours are available separately. - Potential for Multiple Coats: Very dark or uneven surfaces may require more than one coat for full opacity.
Setup, Compatibility & Care Instructions ### Setup 1. Preparation: Ensure the surface is clean, dry, and free from dust, grease, and loose material. Fill any cracks or holes and sand smooth. For previously painted surfaces, ensure they are sound. 2. Priming (Optional but Recommended): For new plaster, porous surfaces, or when significantly changing colour, apply a suitable primer or a mist coat (paint thinned with 10-20% water) first. 3. Application: Stir the paint thoroughly before use. Apply evenly with a good quality brush or roller. Avoid overspreading. 4. Coats: Typically, two coats are recommended for best results. Allow adequate drying time between coats (refer to product label for specific times, usually 2-4 hours). 5. Ventilation: Ensure good ventilation during application and drying. ### Compatibility - Surfaces: Ideal for interior walls, ceilings, wood (e.g., skirting boards, doors, furniture), and metal (e.g., radiators, cabinets) after proper priming. - Other Paints: Can be applied over most existing emulsion or water-based paints, provided the surface is sound. ### Care - Cleaning: Once fully cured (typically 7-14 days), painted surfaces can be gently wiped clean with a damp, soft cloth and mild, non-abrasive detergent. Avoid harsh chemicals or abrasive scrubbers which can damage the matt finish. - Maintenance: Regularly dust surfaces to prevent build-up. Touch-ups can be done carefully with leftover paint if needed.
