Sandtex Ultra Smooth Masonry Paint - Cream

With Microseal technology - extremely durable, breathable, waterproof and dirt resistant. Approx c...

Currently unavailable

Colour

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

This guide is for homeowners and DIY enthusiasts looking to protect and beautify exterior masonry surfaces. Sandtex Ultra Smooth Masonry Paint provides an extremely durable, breathable, waterproof, and dirt-resistant finish. Keep in mind that achieving optimal results requires proper surface preparation.

All features

ColourCream
Model Part NumberCORNISH-CREAM-SMOOTH-5L
BrandSandtex

Extended Product Information

FAQs

What surfaces can I use Sandtex Ultra Smooth Masonry Paint on?

Sandtex Ultra Smooth Masonry Paint is suitable for use on exterior masonry surfaces such as brick, concrete, render, and stone.

How many coats of paint are recommended?

For optimal results, apply two coats of Sandtex Ultra Smooth Masonry Paint.

How long does it take for the paint to dry?

The paint is rainproof in 1 hour. However, allow several hours for the paint to fully dry before exposing it to heavy use or cleaning.

How much area does a 5L tin of paint cover?

Approximately 12-16 square meters per liter. A 5L tin covers about 60-80 square meters.

How do I prepare the surface before painting?

Clean the surface thoroughly, repair any damage, and ensure it's dry. Apply a primer if necessary.

Can I use this paint in cold weather?

It is best to apply the paint when the temperature is between 10°C and 25°C. Avoid painting in extreme cold or heat.

How do I clean the paint brushes and rollers?

Clean tools with water immediately after use.

Is the paint breathable?

Yes, Sandtex Ultra Smooth Masonry Paint is breathable, allowing moisture to escape from the substrate.

Troubleshooting

Paint is peeling or flaking.

Ensure proper surface preparation before applying. Remove loose paint, clean the surface, and apply a primer if necessary. Apply the paint in thin, even coats.

Paint is not covering the surface properly.

Ensure you're applying a sufficient number of coats, typically two. Make sure the surface is properly primed, particularly on porous surfaces.

Paint is taking too long to dry.

Ensure the application is done in suitable weather conditions, avoid painting in extreme temperatures or high humidity. Ensure proper ventilation.

Paint shows signs of mould or mildew.

Clean the affected area with a mould and mildew remover before repainting. Ensure the surface is thoroughly dry before applying the paint.

Uneven finish or streaks.

Ensure the paint is well-stirred before application. Apply the paint in even strokes and avoid overloading the brush or roller. Use a high-quality brush or roller for a smoother finish.

Pros and Cons

Pros

  • Durable and long-lasting protection against the elements.
  • Breathable formula prevents moisture buildup and damage.
  • Dirt-resistant properties reduce the need for frequent cleaning.
  • Quick drying time allows for faster project completion.
  • Flexible coating resists cracking and peeling.
  • Wide coverage area for efficient use of paint.

Cons

  • Requires proper surface preparation for optimal results.
  • May require multiple coats for complete coverage on some surfaces.
  • Coverage can vary based on surface porosity and application method.
  • Color options may be limited compared to other paint types.
  • Initial cost may be higher than some alternative masonry paints.
  • Application in extreme weather conditions may affect performance.

Setup, Compatibility & Care

  1. Surface Preparation:
  • Clean the surface thoroughly to remove dirt, algae, and loose particles. Use a pressure washer if necessary.
  • Repair any cracks or damage with a suitable filler.
  • Ensure the surface is dry before painting.
  • Apply a primer if needed, especially on bare or porous surfaces.
  1. Application:
  • Stir the paint well before use.
  • Apply two coats for optimal results, allowing the first coat to dry completely before applying the second.
  • Use a brush, roller, or spray, depending on the surface and your preference.
  • Follow the manufacturer's instructions for drying times.
  1. Compatibility:
  • Sandtex Ultra Smooth Masonry Paint is compatible with most exterior masonry surfaces, including brick, concrete, render, and stone.
  • Avoid applying in extreme temperatures or when rain is expected within an hour.
  • Always test the paint in an inconspicuous area to ensure compatibility.
  1. Care:
  • Clean tools with water immediately after use.
  • Wash the painted surface with mild soap and water when needed.
  • Avoid using abrasive cleaners or high-pressure washers, which could damage the paint film.