Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
This guide helps homeowners and DIY enthusiasts get the most out of Sandtex Ultra Smooth Masonry Paint. It provides ultimate protection for exterior walls, offering durability and weather resistance. Note that optimal results depend on proper surface preparation and application techniques.
| Colour | Grey |
|---|---|
| Brand | Sandtex |
Coverage is approximately 12-16 square meters per litre, but this can vary depending on the surface porosity and application method.
The paint is rainproof in 1 hour. Allow sufficient time for the paint to fully dry before exposing it to heavy rain or washing.
Yes, but ensure the existing paint is sound and well-adhered. Clean the surface thoroughly and lightly sand it to improve adhesion. Apply a primer if necessary.
Yes, priming is recommended for bare surfaces to ensure proper adhesion and a uniform finish. Ensure you use an appropriate primer for masonry surfaces.
Clean brushes and rollers immediately after use with warm, soapy water.
It is suitable for most common masonry surfaces, including brick, render, and concrete. Always test on a small, inconspicuous area to ensure compatibility.
Sandtex Ultra Smooth Masonry Paint is rainproof in 1 hour. If rain occurs after this period, the paint should not be affected. Allow additional drying time if rain occurs within the first hour.
Ensure the surface is clean, dry, and properly prepared. Prime any bare areas. Allow adequate drying time between coats.
Make sure the surface is properly prepared, remove any loose paint or debris. Apply the paint in the correct conditions and avoid excessive build-up.
Ensure that two coats have been applied. Use the correct amount of paint per square meter (approx 12-16 sqm per liter). Ensure proper application technique.
Ensure that you have applied the paint properly. Clean the surface with a mould cleaner. Consider applying a dedicated anti-mould treatment.
