Siramico Coatings One Coat Anti-Slip Floor Paint - 5 Litres - Grey
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This durable floor paint by SIRAMICO COATINGS is designed for homeowners and DIY enthusiasts looking to protect and enhance concrete, stone, brick, and wood floors. Its key benefit is providing a tough, quick-drying, and long-lasting finish that withstands heavy traffic. A potential caveat is that optimal drying times are dependent on ambient temperature and humidity.
All features
| Colour | Grey |
|---|---|
| Model Part Number | SIRAM-FPW5L-01 |
| Brand | SIRAMICO COATINGS |
Extended Product Information
FAQs
What surfaces can I use this floor paint on?
This paint is suitable for concrete, stone, brick, and wood floors.
Is this paint safe for indoor use?
Yes, it is an eco-friendly, non-toxic, water-based formula with no VOCs and no odor, making it safe for indoor applications.
How long does it take to dry?
The paint dries in 1-4 hours at 20°C. Drying times can vary based on temperature and humidity.
How do I clean up after painting?
Clean brushes, rollers, and spills with water while the paint is still wet.
Do I need a primer?
While the paint is designed for direct application, proper surface preparation is key. For extremely porous or stained surfaces, a compatible primer may improve adhesion and coverage.
How many coats should I apply?
Typically, two thin, even coats are recommended for best results. Allow sufficient drying time between coats.
Can this paint be used outdoors?
The product description focuses on indoor use and durability for foot traffic. For exterior applications, consult the manufacturer for suitability or specific product recommendations.
Troubleshooting
Paint is not adhering properly or peeling.
Ensure the surface was thoroughly cleaned and prepared before application. Dust, grease, or moisture can prevent proper adhesion. Re-prepare the surface and reapply.
Uneven finish or brush marks visible.
Apply paint in thin, even coats using a high-quality roller or brush. Avoid overworking the paint. Ensure consistent application technique.
Drying time is longer than expected.
Lower temperatures, higher humidity, or thicker coats can extend drying times. Ensure the application environment is within the recommended temperature range (typically above 10°C) and humidity levels are moderate.
Paint appears streaky after drying.
This can be due to insufficient stirring or inconsistent application. Ensure the paint is thoroughly mixed and applied evenly. Consider a second thin coat if necessary.
Pros and Cons
Pros
- Suitable for a wide range of common floor materials.
- Environmentally friendly with no harmful fumes.
- Durable finish stands up well to foot traffic.
- Fast drying time reduces project duration.
- Easy to apply for a professional result.
- Enhances the appearance and protects floors.
Cons
- Drying time is temperature-dependent.
- May require multiple coats for full opacity on some surfaces.
- Primarily for floors, not suitable for vertical surfaces without specific preparation.
- Surface preparation is critical for optimal adhesion and durability.
Setup, Compatibility & Care
Surface Preparation: Ensure all surfaces are clean, dry, and free from grease, oil, and loose debris. For concrete, a mild acid etch or mechanical preparation may be required for optimal adhesion. Ensure wood surfaces are sanded and clean.
Compatibility: Suitable for concrete, stone, brick, and wood floors. Avoid application on previously coated or sealed surfaces unless properly prepared or compatible with water-based paints. Always test in an inconspicuous area first.
Application: Apply using a brush or roller. Stir the paint thoroughly before and during use. Apply in thin, even coats. Allow each coat to dry for 1-4 hours at 20°C before applying the next. Ensure good ventilation during application and drying.
Care: Clean with a damp cloth and mild detergent. Avoid abrasive cleaners or harsh chemicals, which may damage the finish. Regular sweeping or vacuuming will help maintain the floor's appearance.