Siramico Coatings One Coat Anti-Slip Floor Paint - Black - 5 Litres
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This 5-litre Black SIRAMICO COATINGS One Coat Anti-Slip Floor Paint is designed for homeowners and DIY enthusiasts looking for a durable, easy-to-apply, and eco-friendly solution for various flooring surfaces. Its key benefit is providing long-lasting protection that can withstand heavy foot traffic. A potential caveat is the drying time, which can vary based on environmental conditions.
All features
| Colour | Black |
|---|---|
| Model Part Number | SIRAM-FPW5L-01 |
| Brand | SIRAMICO COATINGS |
Extended Product Information
FAQs
What surfaces can I use this floor paint on?
This paint is suitable for multiple surfaces including concrete, brick, stone, and wood.
Is this paint safe to use indoors?
Yes, the formula is water-based, non-toxic, and contains no VOCs or odors, making it safe for indoor use.
How long does it take for the paint to dry?
The paint typically dries in 1-4 hours at 20°C, but this can vary based on temperature and humidity.
Do I need a special primer?
While the paint is designed for easy application, using a primer on very porous surfaces like unsealed concrete or stone can improve adhesion and coverage.
How should I clean my newly painted floor?
Clean spills immediately. For regular cleaning, use a damp cloth or mild detergent with water. Avoid abrasive cleaning materials.
Can I use this paint for exterior applications?
The product description focuses on interior use and durability for foot traffic. For exterior applications, ensure compatibility with weather conditions and UV exposure, or consider a product specifically designed for outdoor use.
What is the coverage rate of a 5-litre can?
Coverage rates can vary based on surface porosity and application thickness. It is recommended to check the product packaging for specific coverage details or perform a test area.
Troubleshooting
Paint not adhering properly
Ensure the surface was thoroughly cleaned and dried before application. Remove any grease, oil, or dust. Consider applying a primer if the surface is very porous or previously coated.
Uneven finish or brush marks visible
Stir the paint well before and during use. Apply in thin, even coats using a quality brush or roller. Avoid overworking the paint.
Extended drying time
Drying times are dependent on temperature and humidity. Ensure application occurs in optimal conditions (around 20°C and low humidity). If conditions are cooler or more humid, allow significantly more drying time.
Slight odor persists after drying
While the formula is low odor, some residual scent may be present, especially in poorly ventilated areas. Ensure the space is well-ventilated during and after application to aid dissipation.
Pros and Cons
Pros
- Suitable for a wide range of materials including concrete, brick, stone, and wood.
- Eco-friendly water-based formula with no VOCs or odors for safe indoor application.
- Designed for high-traffic areas, offering durable, long-lasting protection.
- Fast-drying formula reduces project time.
- Easy to apply with standard tools like brushes or rollers.
Cons
- Drying time can vary, potentially exceeding 4 hours in cooler or more humid conditions.
- Primarily a floor paint; may not be suitable for vertical surfaces or applications requiring extreme chemical resistance without a specific primer/sealer.
- A 5-litre can is a significant quantity for small touch-up jobs.
Setup, Compatibility & Care Instructions
Preparation:
- Ensure the surface is clean, dry, and free from grease, oil, and loose debris. For best results, clean thoroughly and allow to dry completely.
- For porous surfaces like concrete or stone, a primer might be beneficial for optimal adhesion, though the product is designed for direct application.
Application:
- Stir the paint thoroughly before use.
- Apply evenly using a brush or roller. Avoid over-application.
- Allow the first coat to dry according to the temperature guidelines (1-4 hours at 20°C) before applying a second coat if necessary, though it is designed for one-coat coverage.
Compatibility:
- Compatible with concrete, brick, stone, and wood surfaces.
- Ensure compatibility with existing floor treatments before application; test in an inconspicuous area if unsure.
Care:
- Clean spills immediately.
- For regular cleaning, use a damp cloth or a mild detergent with water. Avoid abrasive cleaners that could damage the finish.