Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
This guide is for anyone looking to protect and enhance metal surfaces with a durable, attractive finish. Hammerite Direct to Rust Metal Paint offers a 3-in-1 solution, acting as a primer, undercoat, and topcoat, saving you time and effort. Note that while this paint is designed for direct application to rust, proper surface preparation is still crucial for optimal results.
| Colour | Black |
|---|---|
| Model Part Number | 5084781 |
| Brand | Hammerite |
One 400ml can typically covers approximately 0.5 square meters.
No, this paint is specifically designed for use on metal surfaces.
The paint is touch dry in approximately one hour, but allow sufficient time for complete drying between coats.
No, Hammerite Direct to Rust Metal Paint acts as a primer, undercoat, and topcoat in one.
Yes, this paint is designed to be applied directly to rust. However, remove loose rust and flaking paint for best results.
It provides a hammered effect with a metallic sheen.
Yes, it is suitable for both indoor and outdoor use.
Abrade smooth surfaces and remove all loose rust and flaking paint with a wire brush. Remove dirt, dust, and grease. Rinse with clean water and allow to dry before applying the paint.
Apply thinner coats and ensure the can is held the correct distance from the surface. Avoid spraying too much paint in one area.
Ensure the can is shaken thoroughly before use. Apply the paint in even coats, without concentrating in one area.
Ensure adequate ventilation. Check the temperature and humidity levels, as this can affect drying times.
Apply multiple thin coats, allowing the recommended drying time between coats. Ensure the can is shaken well before each use.
Setup:
Compatibility:
Hammerite Direct to Rust Metal Paint is compatible with a wide range of metal surfaces, including:
It is not recommended for use on plastic or wood.
Care:
