Johnstone's Revive Tile Paint - Antique Cream 750Ml
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide helps homeowners easily refresh their kitchens and bathrooms with Johnstone's Tile Paint. It provides a durable, glossy finish in various colors, eliminating the need for retiling. However, it's essential to ensure proper surface preparation for optimal results.
All features
| Colour | Cream |
|---|---|
| Model Part Number | 390305 |
| Brand | Johnstone's |
Extended Product Information
FAQs
Do I need to prime the tiles before painting?
No, Johnstone's Tile Paint is designed to be applied directly to the tiles without a primer.
How many coats of paint are needed?
Typically, two coats are recommended for optimal coverage and durability.
How long does it take for the paint to dry?
The drying time will vary, so refer to the product label, but usually a few hours between coats.
Can I use this paint on floor tiles?
Yes, Johnstone's Tile Paint is suitable for both wall and floor tiles.
How do I clean the painted tiles?
Use a mild detergent and water. Avoid abrasive cleaners.
Is the paint water-resistant?
Yes, once fully dried, the paint provides a water-resistant finish.
What colors are available?
The paint is available in several colors. Please check the product packaging or your local retailer for the full range.
Can I use this paint in a shower?
Yes, but ensure proper ventilation to prevent moisture build-up.
Troubleshooting
Paint is not adhering properly.
Ensure the tile surface is clean, dry, and lightly sanded. Apply a second coat of paint.
Paint is peeling or flaking.
Make sure the surface was prepared correctly. Remove loose paint, sand the edges and apply another coat of paint.
Uneven finish or brush marks.
Use a high-quality brush or roller. Apply thin, even coats, and avoid overworking the paint.
Pros and Cons
Pros
- Easy to apply, saving time and effort.
- Provides a durable and long-lasting finish.
- Low-odour formula enhances user experience.
- No primer required, simplifying the preparation process.
- Suitable for various tile types, increasing versatility.
Cons
- Surface preparation is crucial for optimal adhesion.
- May require multiple coats for full coverage.
- Color selection may be limited compared to other paint types.
- Glossy finish may not be suitable for all design preferences.
- Not recommended for high-moisture environments without proper ventilation.
Setup, Compatibility & Care
- Preparation:
- Clean the tile surface thoroughly, removing any dirt, grease, or mildew.
- Lightly sand glossy tiles to improve adhesion.
- Rinse and allow the surface to dry completely.
- Application:
- Stir the paint well before use.
- Apply the first coat evenly using a brush or roller.
- Allow to dry according to the manufacturer's instructions (typically a few hours).
- Apply a second coat for optimal coverage.
- Compatibility:
- Suitable for use on ceramic tiles.
- Ensure the paint is compatible with the existing grout.
- Care:
- Clean the painted tiles with a mild detergent and water.
- Avoid abrasive cleaners or scrubbing pads.
- In high-moisture areas, ensure adequate ventilation.