Johnstone's Revive Tile Paint 750Ml - Grey
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone looking to refresh their kitchen or bathroom tiles using Johnstone's Revive Tile Paint. The paint offers an easy, water-based solution to revitalize your tiles without the need for a primer, offering a durable and glossy finish. However, ensure adequate ventilation during application due to the low-odor formula.
All features
| Colour | Grey |
|---|---|
| Brand | Johnstone's |
Extended Product Information
FAQs
Do I need a primer before applying Johnstone's Revive Tile Paint?
No, this paint is designed for direct application to tiles without the need for a primer or undercoat.
Can I use this paint on floor tiles?
Yes, Johnstone's Revive Tile Paint is suitable for both wall and floor tiles.
How long does it take for the paint to dry?
Drying times can vary, but generally, the paint is touch-dry within a few hours. Refer to the product instructions for complete drying times before use.
How do I clean the painted tiles?
Use a mild detergent and water. Avoid abrasive cleaners or scrubbing pads.
Is the paint water-resistant?
Yes, the paint offers a durable and water-resistant finish, making it suitable for bathrooms and kitchens.
What colors are available?
The paint is available in a range of colors, including grey, white, and cream. Please check the product listing for available colors.
Can I use this paint on all types of tiles?
Johnstone's Revive Tile Paint is compatible with most ceramic tiles. Always test on a small, inconspicuous area first.
How many coats of paint are needed?
Multiple thin coats are recommended for optimal coverage and durability. Two or three coats are usually sufficient, but this can vary depending on the existing tile color and the new color.
Troubleshooting
Paint is not adhering properly.
Ensure the tile surface is clean and degreased. Lightly sand glossy tiles before application and apply thin coats.
Paint finish is not glossy.
Ensure proper application and allow the paint to fully dry between coats. Multiple thin coats often achieve the best gloss.
Paint shows brush marks.
Use a high-quality brush or roller. Apply the paint evenly, avoiding overworking the surface.
Pros and Cons
Pros
- Easy to apply, saving time and effort.
- Water-based, making cleanup simple and reducing strong odors.
- Durable and long-lasting finish that resists wear and tear.
- No primer required, simplifying the application process.
- Suitable for various tile types, offering versatile use.
Cons
- Requires proper ventilation during application.
- May require multiple coats for full coverage, depending on the existing tile color.
- Color accuracy may vary slightly from the displayed color.
- Surface preparation is still important for optimal adhesion.
Setup, Compatibility & Care
- Preparation: Clean the tile surface thoroughly to remove dirt, grease, and any loose particles. Use a degreasing cleaner for best results. Lightly sand glossy tiles to help with adhesion.
- Application: Apply the tile paint directly to the prepared surface using a brush or roller. Multiple thin coats are recommended for better coverage and durability. Allow each coat to dry according to the product instructions.
- Compatibility: Johnstone's Revive Tile Paint is compatible with most ceramic tiles. Always test on a small, inconspicuous area first to ensure compatibility and desired results.
- Care: Clean the painted tiles with a mild detergent and water. Avoid abrasive cleaners or scrubbing pads that could damage the finish. For spills, wipe them up promptly to prevent staining.