Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
For homeowners and DIY enthusiasts seeking to protect their kitchen walls and ceilings, Johnstone's Kitchen Matt Emulsion Paint in Blue offers a specialized solution. Its key benefit is the grease-resisting formula, providing a tough and durable matt finish specifically designed for high-traffic and high-condensation areas. To achieve optimal performance and long-lasting results, proper surface preparation and application techniques are essential.
| Colour | Blue |
|---|---|
| Model Part Number | 5010426807904 |
| Brand | Johnstone's |
Info needed: Please refer to the product packaging for specific coverage rates. Typically, a 2.5L tin of emulsion paint may cover approximately 25-30 square meters per coat, depending on the surface porosity and application method.
While some colours may provide good coverage in one coat, for optimal durability, grease resistance, and colour depth, we generally recommend applying two coats. More coats may be needed if painting over a significantly darker colour.
Yes, due to its grease-resisting and durable properties designed for high condensation areas, it can also be a suitable choice for bathrooms, providing similar protection against moisture and steam.
This is a Matt Emulsion paint, providing a smooth, non-reflective, and contemporary finish. This type of finish is excellent for disguising minor wall imperfections.
Info needed: Please refer to the product label for specific touch dry and recoat times, as these can vary. Generally, emulsion paints are touch dry within 1-2 hours and can be recoated after 2-4 hours, with full hardness achieved over several days.
Clean all painting equipment immediately after use with warm, soapy water. Rinse thoroughly until the water runs clear, then reshape brushes and rollers and allow them to air dry.
No, Johnstone's Kitchen Matt Emulsion Paint is formulated specifically for interior walls and ceilings. It is not recommended for exterior surfaces, or for use on woodwork, metal, or furniture.
Ensure the surface was thoroughly cleaned, degreased, and free from loose paint or dust. Lightly sand glossy surfaces to provide a 'key' for the paint. A suitable primer may be required for challenging surfaces.
Apply paint evenly without overspreading. Use a high-quality roller and maintain a wet edge. Ensure proper drying time between coats and apply consistent pressure. Avoid painting in direct sunlight or overly warm conditions.
Ensure adequate ventilation during and after painting. Keep windows and doors open to allow fresh air circulation. The odour should dissipate completely within a few days.
This paint often requires two coats for optimal colour and protection. Apply a second coat after the first has fully dried. For significant colour changes, a third coat or a tinted primer may be beneficial.
