Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
The Johnstone's Kitchen Matt Emulsion Paint in Silver is specifically engineered for homeowners and DIY enthusiasts looking to protect and beautify high-condensation and high-traffic areas like kitchens. Its key advantage lies in its grease-resisting properties and durable finish, ensuring lasting color and superior protection against daily wear and tear. While highly effective for its intended purpose, users should note its specialized formulation means it's optimized for challenging environments, and standard emulsions might suffice for less demanding rooms.
| Colour | Silver |
|---|---|
| Model Part Number | 5010426807805 |
| Brand | Johnstone's |
Yes, this paint is specially formulated to handle areas of high condensation, making it an excellent choice for bathrooms as well as kitchens.
For best results and full coverage, typically two coats are recommended. However, this can vary depending on the original surface color and porosity.
The paint is usually touch dry within 2-4 hours, but always refer to the specific instructions on the paint can for precise drying and recoat times, as environmental conditions can affect this.
Yes, due to its durable and grease-resisting properties, the Johnstone's Kitchen Matt Emulsion can be wiped clean with a damp cloth, making maintenance easy.
While it can be applied directly to most previously painted surfaces, a suitable primer is recommended for bare, new, or highly absorbent surfaces to ensure optimal adhesion and finish.
No, this paint is specifically formulated for interior walls and ceilings. For wooden or metal surfaces, you would need a different type of paint designed for those materials.
Ensure the surface was clean, dry, and smooth before painting. Apply paint evenly using consistent strokes and avoid overspreading. Allow sufficient drying time between coats.
Thoroughly stir the paint before and during application. Apply an adequate amount of paint, typically two coats are recommended for full coverage. Consider priming absorbent or dark surfaces.
This often indicates poor surface preparation. Ensure surfaces are clean, dry, and free from grease, dust, or loose paint. Scrape off any peeling paint, sand, and re-prime before repainting.
Bubbles can occur if paint is applied too thickly, if the roller is moved too quickly, or if the surface is damp. Ensure even application and check for moisture in the wall. Paint in moderate temperatures.
Ensure adequate ventilation in the room. High humidity or low temperatures can prolong drying times. Apply paint in recommended thickness; very thick coats take longer to dry.
