Trade Paints Epoxy Floor Paint - Slate Grey - 5L
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide helps users of Trade Paints Epoxy Floor Paint understand its application and benefits. Ideal for use in high-traffic interior areas like workshops and showrooms, it provides a durable, chemical-resistant, glossy finish. Note that this paint is designed for interior use only and requires proper surface preparation for optimal results.
All features
| Colour | Grey |
|---|---|
| Model Part Number | 18B25 |
| Brand | Trade Paints |
Extended Product Information
FAQs
What surfaces can I use this paint on?
This paint is ideal for concrete, stone, and tile surfaces.
How long does it take for the paint to dry?
The paint dries to touch within 24 hours, but it takes 7 days to fully cure.
Can I use this paint outdoors?
No, this paint is designed for interior use only.
What is the coverage per litre?
The coverage is approximately 10 m² per litre.
What should I use to thin the paint?
Use Trade Paints 2 Pack Epoxy Thinner.
How do I clean the floor after painting?
Regular cleaning with mild detergents is recommended.
Is this paint resistant to chemicals?
Yes, it offers exceptional resistance to many chemicals, solvents, and oils.
What tools are needed for application?
You can apply this paint using a brush or a roller.
Troubleshooting
Paint is not drying properly.
Ensure proper mixing of the two components and that the application environment is within the recommended temperature range. Check for excessive humidity.
Paint is peeling or flaking.
Ensure proper surface preparation before application, including cleaning and degreasing. Make sure the surface is properly primed.
Gloss finish is not achieved.
Apply an even coat, avoid over application and ensure the paint is mixed properly. Check the product data sheet for application instructions.
Pros and Cons
Pros
- Provides a highly durable and long-lasting floor surface.
- Excellent resistance to chemicals, solvents, and oils.
- Easy to apply with a brush or roller.
- Creates a glossy, attractive finish.
- Ideal for high-traffic areas such as workshops and showrooms.
Cons
- Suitable for interior use only.
- Requires a 24-hour drying time and 7 days to fully cure.
- Needs proper surface preparation for optimal adhesion.
- Application requires mixing two components.
Setup, Compatibility & Care
- Preparation: Ensure the concrete surface is clean, dry, and free from any loose particles, oil, or grease.
- Mixing: Mix the two components of the epoxy paint according to the manufacturer's instructions.
- Application: Apply the paint evenly using a brush or roller. Multiple coats may be required.
- Drying: Allow 24 hours for drying and 7 days for full curing.
- Compatibility: Use Trade Paints 2 Pack Epoxy Thinner for thinning if needed. This paint is specifically formulated for concrete, stone, and tile surfaces.
- Care: Regular cleaning with mild detergents is recommended. Avoid harsh chemicals that may damage the coating.