Trade Paints Epoxy Floor Paint - Black - 5L
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide helps users understand and effectively apply Trade Paints Epoxy Floor Paint, ideal for high-traffic interior areas like workshops and showrooms. The paint provides a tough, glossy, and chemical-resistant finish. Note that this paint is for interior use only and requires a 24-hour drying time before light use and a 7-day curing time for full hardness.
All features
| Colour | Black |
|---|---|
| Brand | Trade Paints |
Extended Product Information
FAQs
What is the coverage rate of Trade Paints Epoxy Floor Paint?
The coverage rate is approximately 10 m² per litre.
What is the drying time for Trade Paints Epoxy Floor Paint?
The drying time is 24 hours, but full curing takes 7 days.
Can this paint be used outdoors?
No, this paint is designed for interior use only.
What is the recommended thinner for this paint?
The recommended thinner is Trade Paints 2 Pack Epoxy Thinner.
How should I clean the floor after the paint has dried?
Regular cleaning with a mild detergent and water is recommended.
What type of surfaces is this paint suitable for?
It is suitable for concrete, stone, and tile surfaces.
How many coats of paint are needed?
Multiple coats are recommended to achieve the desired coverage and durability.
What should I do if the paint spills on my skin?
Wash the affected area thoroughly with soap and water. If irritation persists, seek medical advice.
Troubleshooting
Paint is not drying properly
Ensure the correct mixing ratio of the epoxy components and proper ventilation. Check the application environment's temperature and humidity levels.
Paint finish is not glossy
Ensure proper mixing, application technique, and the use of the correct thinner. Multiple coats may enhance the gloss level.
Paint shows poor chemical resistance
Ensure the paint has fully cured for 7 days. Verify the specific chemicals the paint is exposed to are within the product's resistance capabilities.
The paint is peeling or flaking
Ensure proper surface preparation. The surface must be clean, dry, and free from contaminants before applying the paint.
Pros and Cons
Pros
- Provides a highly durable and long-lasting floor coating.
- Offers excellent resistance to a wide range of chemicals and solvents.
- Easy to apply with a brush or roller.
- Creates a seamless and glossy finish.
- Ideal for high-traffic areas, reducing the need for frequent maintenance.
Cons
- Requires a 2-pack system, which involves mixing components.
- Suitable only for interior applications.
- Full curing time takes 7 days.
- Requires specific Trade Paints 2 Pack Epoxy Thinner.
- May require multiple coats for optimal coverage and durability.
Setup, Compatibility & Care
Setup
- Surface Preparation: Ensure the surface is clean, dry, and free from any existing coatings, oil, grease, or contaminants. Properly prepare concrete, stone, or tile surfaces by cleaning and degreasing.
- Mixing: Mix the two-part epoxy components according to the manufacturer's instructions using the correct ratio. Use the recommended Trade Paints 2 Pack Epoxy Thinner for optimal results.
- Application: Apply the paint evenly using a brush or roller. Apply multiple coats to achieve desired coverage and durability, allowing for the recommended drying time between coats.
Compatibility
- Suitable Surfaces: Compatible with concrete, stone, and tile surfaces. Always test the product in a small, inconspicuous area to ensure compatibility.
- Thinner: Use only Trade Paints 2 Pack Epoxy Thinner for thinning and cleaning.
Care
- Cleaning: Clean spills immediately. Regular cleaning with a mild detergent and water is recommended to maintain the finish.
- Maintenance: Inspect the floor regularly for any signs of damage. Address any damage promptly to prevent further deterioration.