Metal Protekt Spray - White - PKT1286
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The PlastiKote Metal Protekt spray in white is designed for DIY enthusiasts and homeowners seeking a durable, rust-inhibiting finish for metal surfaces. Its primary benefit is providing long-lasting protection against corrosion while offering an attractive gloss white aesthetic. A key consideration is its coverage rate, which requires careful calculation for larger projects. This spray offers a quick-drying, protective coating suitable for various interior and exterior applications, including decorative items and functional metalwork.
All features
| Colour | White |
|---|---|
| Model Part Number | PKT1286 |
| Brand | PlastiKote |
Extended Product Information
FAQs
How long does it take for the spray to dry?
The PlastiKote Metal Protekt spray is touch-dry within 10-20 minutes.
What surfaces can I use this spray on?
It is ideal for various metal surfaces, including wrought iron, garden furniture, and railings, for both interior and exterior use.
How much area does one can cover?
One 400ml can covers approximately 2.23 square meters, depending on the surface and application thickness.
Do I need to use a primer?
For best adhesion and protection, especially on bare or heavily rusted metal, priming is recommended. Always test on an inconspicuous area first.
How should I clean the nozzle after use?
After use, turn the can upside down and spray for a few seconds until clear propellant comes out. This prevents the nozzle from clogging.
Can I paint over this spray?
Once fully cured, you can apply compatible topcoats over the Metal Protekt spray. Always test for compatibility first.
Is this spray suitable for high-heat applications?
This product is designed for general protection and decoration. It is not formulated for high-heat applications like engine parts or exhaust systems.
Troubleshooting
Uneven spray or spitting
Shake the can more frequently during use. Ensure the nozzle is not blocked. If blocked, clean as per care instructions.
Coating is peeling or not adhering
Surface was not properly prepared. Ensure it was clean, dry, and free from contaminants. Heavy rust may require more aggressive removal and potentially a primer.
Runs or drips in the finish
Applied too thickly or too close to the surface. Apply in thin, even coats with the recommended distance. Allow adequate drying time between coats.
Product does not spray
Check if the nozzle is clogged. Ensure the can is held upright and the nozzle is clear. If the can is new, ensure the safety tab (if present) has been removed.
Pros and Cons
Pros
- Offers effective long-term protection against rust and corrosion.
- Provides a clean, attractive gloss white finish.
- Quick drying time speeds up application and project completion.
- Suitable for a wide range of metal items, both indoors and outdoors.
- Easy spray application for even coverage.
Cons
- Coverage may vary based on surface porosity and application technique.
- Requires proper ventilation during application due to aerosol nature.
- Specific surface preparation is necessary for optimal adhesion and protection.
- Not suitable for all types of plastics or non-metal surfaces.
Setup, Compatibility & Care
Setup:
- Ensure the metal surface is clean, dry, and free from grease, oil, or loose paint.
- For best results, remove any existing rust with a wire brush or sandpaper.
- Prime the surface if necessary, especially if it's bare metal or has been heavily rusted.
- Shake the can vigorously for at least two minutes before use, and periodically during application.
Compatibility:
- Primarily designed for ferrous and non-ferrous metal surfaces.
- Test on an inconspicuous area first if applying to plastics or painted surfaces not intended for this type of coating.
- Not recommended for use on galvanized steel without appropriate primer.
Care:
- For best longevity, reapply a protective coat every 1-2 years, depending on environmental exposure.
- Clean the spray nozzle immediately after use by inverting the can and spraying for a few seconds until clear propellant emerges.