Arthouse Tropical Floral Wallpaper - Sea Blue



Currently unavailable



Currently unavailable
This Arthouse Tropical Floral Wallpaper in Sea Blue is designed for homeowners looking to add a dramatic and contemporary touch to their living spaces. Its key benefit is creating a captivating feature wall with an exotic jungle theme. A potential caveat is that the 'paste the paper' method may require specific preparation compared to 'paste the wall' wallpapers.
| Pattern | Floral |
|---|---|
| Colour | Blue |
| Model Part Number | 924905 |
| Brand | Arthouse |
Use a good quality wallpaper adhesive specifically designed for 'paste the paper' wallpapers. Follow the adhesive manufacturer's instructions for mixing and application.
Measure the height of your wall and add approximately 10cm (5cm top and 5cm bottom) for trimming. Cut strips to length, ensuring the pattern is oriented correctly before cutting subsequent strips.
A Straight Match means that the pattern on one strip of wallpaper should align horizontally with the pattern on the adjacent strip. The design elements match at the same point on each strip.
This wallpaper is generally not recommended for high-moisture environments like bathrooms unless specifically stated. If used, ensure excellent ventilation and consider a suitable sealant.
The pattern repeat is 53cm. This means the design motif repeats every 53cm along the length of the wallpaper roll.
Most 'paste the paper' wallpapers can be stripped dry when you're ready for a change. If it's particularly stubborn, you may need to score the surface and use a wallpaper steamer or stripper solution.
Sea blue refers to a shade of blue that evokes the colour of the ocean, typically a medium to deep blue with hints of green or grey.
Ensure the wall is clean, dry, and free from dust or grease. Verify that the correct wallpaper adhesive has been used and applied evenly. Allow adequate booking time for the paste to soak into the paper.
Check that the 'Straight Match' is being followed correctly. Ensure the first strip is hung perfectly vertical using a spirit level. Trim excess paper carefully around edges and obstacles.
Smooth the wallpaper from the center outwards using a wallpaper brush or smoothing tool immediately after hanging. If bubbles persist after drying, a pinprick might allow air to escape, but this is a temporary fix and suggests poor initial application.
Use a seam roller or a clean, damp cloth to gently wipe away excess paste from the edges immediately after joining strips. Ensure paste is applied evenly and not excessively.
Setup: This wallpaper uses the 'Paste the Paper' method. Ensure you have wallpaper adhesive suitable for your wall type. Apply the paste evenly to the back of the wallpaper strip, book it (fold pasted sides together) for the recommended time, and then hang. A pasting table is recommended.
Compatibility: Suitable for most interior walls. Ensure walls are clean, dry, and properly prepared (primed if necessary) before application. Not recommended for high-moisture areas like bathrooms unless specifically stated by the manufacturer and sealed appropriately.
Care: To clean, use a *slightly damp* cloth for gentle wiping. Avoid harsh chemicals or excessive moisture, as this can damage the paper and its print.