Arthouse Frosted Wood Mono Wallpaper - Grey - 670200
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Arthouse Frosted Wood Mono Wallpaper in Grey (MPN: 670200) is designed for homeowners seeking a contemporary, on-trend forest effect. Its key benefit is the striking visual appeal with frosted black trees on a snowed background, enhanced by subtle glitter. A potential caveat is that the pattern repeat requires careful alignment during installation.
All features
| Colour | Grey |
|---|---|
| Model Part Number | 670200 |
| Brand | Arthouse |
Extended Product Information
FAQs
What is the pattern repeat for this wallpaper?
The wallpaper has a pattern repeat of 53cm with a 26.5cm match, meaning you need to align every 53cm of the design, with a 26.5cm offset on alternating drops.
Can this wallpaper be used in a bathroom?
Yes, this wallpaper is suitable for bathrooms and kitchens. However, it should not be subjected to direct water splashes or constant high humidity.
How do I clean this wallpaper?
You can gently wipe the wallpaper with a damp cloth. Avoid harsh chemicals or excessive moisture.
What are the dimensions of one roll?
Each roll measures 33ft (10m) in length and 21 inches (53.1cm) in width.
What kind of effect does the glitter provide?
The encased glitter catches the light beautifully, adding a subtle shimmer and enhancing the overall visual appeal of the frosted forest design.
Is this wallpaper easy to hang?
Yes, the wallpaper is designed for quick and easy installation, suitable for DIY projects.
What color is the background?
The background is white, with frosted black trees.
Troubleshooting
Wallpaper not sticking to the wall
Ensure the wall surface is clean, dry, and free from dust or grease. Check that the correct adhesive has been used and applied evenly. For paste-the-wall types, ensure the paste is applied to the wall, not the paper.
Bubbles or wrinkles appear after application
Smooth out bubbles immediately after hanging using a wallpaper brush or smoothing tool, working from the center outwards. If bubbles appear later, they may indicate an issue with adhesive coverage or drying. Small bubbles can sometimes be pricked with a fine needle and smoothed down.
Pattern does not match between strips
Carefully check the pattern repeat (26.5cm match) and ensure each strip is hung in the correct orientation and aligned precisely with the previous strip. Double-check your cuts and measurements.
Glitter is shedding
Some minimal glitter shedding may occur during application. Ensure the adhesive is fully dry. If significant shedding continues, it may indicate insufficient adhesive or damage to the glitter layer.
Pros and Cons
Pros
- Creates a striking, on-trend visual effect.
- Subtle glitter adds an elegant shimmer.
- Suitable for various rooms including high-moisture areas.
- Generous roll size for efficient coverage.
- Designed for straightforward application.
Cons
- Pattern repeat requires careful matching, potentially increasing installation time.
- Glitter may not appeal to minimalist aesthetics.
- Grey and white color scheme might be limiting for some decor styles.
- Requires a smooth, prepared surface for best results.
- May not be suitable for very textured walls.
Setup, Compatibility & Care
Setup: Ensure your walls are clean, dry, and smooth before application. Remove any old wallpaper or loose paint. Measure your wall and calculate the number of rolls needed, accounting for the pattern repeat. Cut the wallpaper to size, following the manufacturer's guidelines for applying adhesive (typically paste-the-wall or paste-the-paper).
Compatibility: This wallpaper is designed for interior walls in all living areas. It is suitable for use in kitchens and bathrooms, but avoid areas with excessive steam or direct water contact. Ensure the wall surface is properly prepared and free from imperfections for optimal adhesion and finish.
Care: To clean, gently wipe the surface with a damp cloth. Avoid using abrasive cleaners or excessive water, as this can damage the glitter and paper. For stubborn marks, a mild soap solution can be used sparingly, followed by a clean damp cloth.