Superfresco Easy Wallpaper - Sage - Floral

Yes, `paste-the-wall` application is generally considered much easier for DIYers. You apply the paste directly to the wall, not the paper, which means no messy pasting table and no need for the paper to soak. This speeds up the process and reduces waste.

We recommend using a high-quality, ready-mixed `heavy duty wallpaper paste` specifically designed for non-woven or `paste-the-wall` wallpapers to ensure optimal adhesion and durability.

While this wallpaper is `washable`, it's primarily designed for dry interior rooms like bedrooms, living rooms, and hallways. High humidity can still affect its longevity and adhesion, so we do not recommend it for bathrooms unless there is exceptionally good ventilation.

Measure the total perimeter of your room and the height of your walls. Divide the perimeter by the roll width (52cm) to get the number of drops. Multiply drops by wall height, then divide by roll length (10 meters). Always add an extra 10-15% for waste due to the `64cm pattern repeat` and `offset design match`, and for any mistakes or future repairs. It's always better to have a little extra than not enough.

An `offset design match` means that to get the pattern to align seamlessly, you'll need to drop the pattern on the next strip by half of the pattern repeat (in this case, 32cm) relative to the previous strip. This creates a staggered, less repetitive look but requires careful measuring and matching during installation.

Yes, the metallic elements are part of the wallpaper's design and are durable for light cleaning. Use a soft, damp sponge to wipe gently; avoid harsh chemicals or abrasive scrubbing which could damage the finish.

Small bubbles are often caused by trapped air or insufficient paste. For minor bubbles, you can carefully pierce them with a fine needle, inject a small amount of paste with a syringe, and smooth. For larger areas, gently lift the edge, reapply paste to the affected area, and re-smooth thoroughly from the center outwards.

The `offset design match` requires precise alignment. Before cutting, dry-hang or lay out your strips to visualize the pattern repeat and how the offset works. Ensure you are cutting with enough overlap to adjust, and always double-check alignment before fully adhering a strip.

This usually indicates inadequate paste application at the edges or improperly prepared walls. Ensure walls are clean, dry, and primed. Reapply paste generously to the lifting edges, press firmly, and smooth down with a seam roller.

Visible seams can result from uneven wall surfaces or improper butt-joining. Ensure wallpaper strips are butted tightly together without overlap. If walls are very uneven, consider using a lining paper beforehand. A `seam roller` can help press edges firmly for a tighter join.