Superfresco Easy Wallpaper - Champagne - Floral

'Paste-the-wall' means you apply the adhesive directly to the wall rather than to the wallpaper itself. This makes hanging quicker, cleaner, and often easier than traditional methods.

For best results, walls should be clean, dry, smooth, and free from loose paint or debris. Fill any holes or cracks, sand them smooth, and consider using a wallpaper primer/sealer for better adhesion and easier future removal.

The wallpaper is 'washable', meaning it can withstand gentle cleaning. It is generally suitable for rooms with moderate humidity like bedrooms, living rooms, and hallways. For high-moisture environments like full bathrooms, a 'scrubbable' or vinyl wallpaper might be more appropriate, though this can handle splashes.

A good quality, ready-mixed wallpaper paste specifically designed for paste-the-wall wallpapers is recommended for optimal adhesion and ease of use.

An 'offset design match' means the pattern on one strip needs to be dropped by a specific distance (in this case, 64cm) to match the pattern on the adjacent strip. You typically match the pattern on the second strip's left edge with the first strip's right edge, usually by shifting it up or down by half the pattern repeat. Always dry-match your strips before cutting to ensure correct alignment.

This wallpaper is washable. You can gently wipe it with a damp sponge and a small amount of mild, non-abrasive soapy water. Blot spills immediately with a clean, dry cloth.

While technically possible, painting over wallpaper is generally not recommended as it can compromise the original design and texture, and make future removal more difficult. If you wish to change the look, it's usually best to remove the old wallpaper first.

Being CO2-neutral indicates that the carbon emissions associated with the production of this wallpaper have been balanced out through carbon offsetting initiatives, contributing to a reduced environmental impact.

Gently smooth them out from the center to the edges with a wallpaper brush or smoother. For stubborn bubbles, carefully puncture with a fine needle and smooth the air out.

Ensure walls were properly prepared and paste was applied evenly to the edges. Reapply a small amount of seam adhesive behind lifting edges and press firmly. Use a seam roller if available.

Check if the wall surface was sufficiently clean and dry. Ensure you used an adequate amount of good quality paste. For small areas, reapply paste and press firmly.

This wallpaper has an offset design match. Ensure you are cutting subsequent strips by dry-matching them to the previous strip to align the 64cm pattern repeat before applying paste. Slow down and double-check alignment for each strip.