Innov8 Coatings Wood and MDF Paint - Grey
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
Innov8 Coatings Wood and MDF Paint is an ideal choice for DIY enthusiasts and professionals seeking a high-performance solution for restoring furniture, cabinetry, and trim. Its all-in-one, self-priming formula saves significant time on projects by eliminating the need for separate undercoats, though users must ensure surfaces are clean and sanded to guarantee long-term adhesion. Featuring a refined grey satin finish, this paint provides a durable, wear-resistant coating suitable for both interior and exterior wood surfaces.
All features
| Colour | Grey |
|---|---|
| Brand | Innov8 Coatings |
Extended Product Information
FAQs
Does this paint require a primer?
No, this is an all-in-one formulation designed to bond directly to prepared wood and MDF without a separate primer.
Can I use this paint outdoors?
Yes, Innov8 Coatings Wood and MDF Paint is suitable for both interior and exterior wood surfaces.
How many coats should I apply?
For best results, we recommend at least two coats, allowing adequate drying time between each application.
How do I clean my brushes after use?
Clean brushes immediately with warm soapy water until the water runs clear.
Is the finish matte or glossy?
The paint provides a satin finish, which sits between matte and gloss for a refined, modern look.
Troubleshooting
Paint is not adhering to the surface
Ensure the surface was sanded and wiped clean of all dust or oily residues before application.
Brush marks are visible after drying
Try using a higher quality synthetic brush and apply thinner, lighter coats instead of one thick coat.
Paint is taking too long to dry
Check that the ambient temperature is above 10 degrees Celsius and that humidity levels are low, as cold or damp conditions delay curing.
Pros and Cons
Pros
- Eliminates the need for a separate primer or undercoat
- Suitable for both interior and exterior applications
- Provides a clean, professional satin finish
- Strong, wear-resistant formula ideal for furniture
- Supported by a 10-year performance guarantee
Cons
- Surface preparation is still required for best results
- Limited to smaller 250ml tin sizes
- Requires careful cleaning of surfaces prior to application
Setup, Compatibility & Care
Before starting your project, ensure the surface is free of dust, grease, and loose debris. While this is a self-priming product, lightly sanding glossy or previously painted surfaces will improve mechanical adhesion significantly. Apply the paint in a well-ventilated area with a temperature above 10 degrees Celsius. For maintenance, simply wipe the finished surface with a soft, damp cloth. Avoid using harsh chemical cleaners, as they may dull the satin sheen over time. Clean brushes and tools immediately after use with soap and water to prevent the paint from hardening on the bristles.