Innov8 Coatings Wood And Mdf Paint - Hydrangea Green - Satin Finish - 250 Ml

Not Available Innov8 Coatings Wood And Mdf Paint - Hydrangea Green - Satin Finish - 250 Ml

Innov8 Coatings 250 ml Wood & MDF Paint is a high-performance, brush-applied coating designed to d...

Currently unavailable

Colour

Black Green Grey

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

Innov8 Coatings 250 ml Wood & MDF Paint in Hydrangea Green is designed for DIY enthusiasts and professionals seeking a durable, high-quality finish with simplified application. Its key benefit is the all-in-one formulation that eliminates the need for primers or top coats, saving time and effort. A potential caveat is that optimal adhesion relies on properly prepared surfaces.

All features

Colour	Green
Brand	Innov8 Coatings

Extended Product Information

FAQs

Do I really need a primer or top coat?

No, the Innov8 Coatings Wood & MDF Paint is an all-in-one formulation designed to bond directly to prepared wood and MDF, eliminating the need for separate primers or top coats.

How long does it take to dry?

The paint is fast-drying. Recoat times are typically within a couple of hours, but always refer to the product packaging for specific drying times, which can vary based on conditions.

What surfaces can I use this paint on?

This paint is ideal for doors, frames, trim, furniture, cabinetry, interior and exterior wood surfaces, and MDF.

What is the coverage rate?

The paint provides coverage of approximately 4-6 square meters per 250 ml can.

How do I clean my brushes after use?

Clean your brushes immediately after use with water.

Is this paint suitable for outdoor use?

Yes, it is suitable for exterior wood surfaces, offering durable protection. Ensure the surface is properly prepared and protected from harsh weather conditions.

What kind of finish does this paint provide?

It provides a smooth, contemporary satin finish.

What is the guarantee period?

The paint comes with a 10-year performance guarantee.

Troubleshooting

Paint not adhering well

Ensure the surface was properly cleaned, degreased, and lightly abraded if necessary. Re-apply after thorough surface preparation.

Brush marks visible

Apply paint in thin, even coats, using long, smooth strokes. Avoid overworking the paint. Ensure the brush is of good quality and suitable for water-based paints.

Uneven color or finish

Stir paint thoroughly before and during use. Ensure consistent application technique and adequate lighting. For deeper colors or uneven coverage, a third coat might be necessary.

Paint appears too thick

Ensure the paint has been stirred sufficiently. If the environment is very cold, allow the paint to reach room temperature. Thinning is generally not required but if absolutely necessary, use minimal water (less than 5%).

Pros and Cons

Pros

Saves time and effort with its all-in-one primer and topcoat functionality.
Offers a long-lasting finish backed by a 10-year performance guarantee.
Provides a professional-looking satin finish suitable for various applications.
Dries quickly, allowing for efficient project completion.
Durable coating resists daily wear and tear.

Cons

Requires proper surface preparation for optimal adhesion.
250ml size is best suited for smaller projects or touch-ups, not large-scale renovations.
Satin finish may not be suitable for users preferring a matte or high-gloss look.

Setup, Compatibility & Care

Preparation: For optimal adhesion and finish, ensure surfaces are clean, dry, and free from dust, grease, and old flaking paint. Lightly abrade glossy surfaces and wipe clean. For previously painted surfaces, ensure they are sound.

Application: Stir the paint thoroughly before use. Apply using a good quality brush. For best results, apply thin, even coats. Allow sufficient drying time between coats as per manufacturer guidelines.

Compatibility: Suitable for bare or prepared wood and MDF. Not recommended for use on previously varnished or heavily lacquered surfaces without proper preparation.

Care: Clean application tools immediately after use with water. The paint offers a durable finish, but gentle cleaning with a damp cloth is recommended for maintenance. Avoid abrasive cleaners.