Evo-Stik Impact Contact Adhesive - Yellow
Not Available
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone needing a strong, versatile adhesive for various DIY projects and repairs. Evo-Stik Impact Adhesive provides instant bonding on contact, eliminating the need for clamps or weights. However, please note that this product is age-restricted, and ID will be required upon purchase.
All features
| Colour | Yellow |
|---|---|
| Model Part Number | 30812365 |
| Brand | Evo-Stik |
Extended Product Information
FAQs
What materials can I bond with Evo-Stik Impact Adhesive?
You can bond wood, MDF, laminate, metal, rigid PVC, cork, and leather.
Does this adhesive require clamping?
No, Evo-Stik Impact Adhesive bonds on contact, eliminating the need for clamps or weights.
Is this adhesive suitable for exterior use?
Yes, but it must be protected from water.
How long does it take for the adhesive to dry?
The adhesive dries in approximately 24 hours.
Is Evo-Stik Impact Adhesive safe for children?
No, it is not safe for children.
What is the shelf life of this adhesive?
Shelf life will vary depending on storage conditions. Check the product for specific expiry information.
Can I use this adhesive on non-porous materials?
Yes, it is effective on both porous and non-porous materials, such as metal.
Troubleshooting
Bond not holding.
Ensure both surfaces were clean and properly prepared. Make sure enough adhesive was applied and that the surfaces were held firmly together for the recommended time.
Adhesive is too thick.
Ensure you are using the correct product and apply a thin even coat, as per instructions.
Adhesive has not dried.
Ensure the product has not expired and that the surfaces have been held together long enough. Also, check the environmental conditions, such as temperature and humidity, as this can affect drying time.
Pros and Cons
Pros
- Instant bonding saves time and effort.
- Bonds a wide variety of materials, making it versatile.
- Eliminates the need for clamps or weights.
- Offers a strong and durable bond.
- Fast drying formula.
- Low odor.
Cons
- Age restricted item, requires ID.
- Exterior use requires protection from water.
- Drying time of 24 hours.
- Not safe for children.
Setup, Compatibility & Care
- Preparation: Ensure surfaces are clean, dry, and free from dust, grease, and loose particles. For best results, lightly abrade non-porous surfaces.
- Application: Apply a thin, even coat of adhesive to both surfaces. Allow the adhesive to become touch dry (approximately 10-20 minutes, depending on the environment).
- Bonding: Carefully align the surfaces and press them firmly together for a few seconds. The bond is instant, so precise alignment is crucial.
- Compatibility: Evo-Stik Impact Adhesive is compatible with wood, MDF, laminate, metal, rigid PVC, cork, and leather.
- Care: Store in a cool, dry place. Avoid extreme temperatures. If the adhesive comes into contact with skin, wash immediately with soap and water.