GROHE QuickGlue A2 - Grey - 41128000
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone using the GROHE QuickGlue A2, a convenient adhesive solution for installing GROHE QuickFix bathroom accessories. The primary benefit is the elimination of drilling, thus preventing damage to tiles and surfaces. Keep in mind that it's crucial to follow the instructions precisely for optimal adhesion and to avoid using it on certain materials like wallpaper or specific plastics.
All features
| Colour | Grey |
|---|---|
| Model Part Number | 41128000 |
| Brand | Grohe |
Extended Product Information
FAQs
What is included in the GROHE QuickGlue A2 set?
The set includes two syringes with glue and two adapters for the wall mounting plate.
How long does the glue take to cure?
The glue requires a curing time of 24 hours.
What surfaces is the GROHE QuickGlue A2 suitable for?
It is suitable for tiles, marble, stone, glass, concrete, wood, plastic, and metal.
What surfaces should I avoid using the glue on?
Avoid using it on wallpaper, plaster coating, and plastics like PE, PTFE, and PP.
Can I remove the accessories after installation?
Yes, you can remove the mounting plates easily by peeling them off with a spatula.
Is the glue safe to use?
The mixture is classified as not hazardous, but subject to special labeling. Avoid contact with skin and eyes.
Where should I store the QuickGlue?
Store the glue in a cool, dry place.
What should I do if the glue spills?
Wipe up any spilled glue immediately with a damp cloth.
Troubleshooting
Accessory not sticking.
Ensure the surface is clean, dry, and free from any residue before applying the glue. Verify that you have used the correct amount of glue and allowed a full 24 hours for curing.
Glue is not dispensing properly.
Check if the syringe is properly connected to the adapter. If the glue has been stored for an extended period or in extreme temperatures, it may have become too thick. Try dispensing on a scrap surface first.
Pros and Cons
Pros
- Avoids the need for drilling, thus preventing damage to surfaces.
- Provides a strong and reliable bond for your bathroom accessories.
- Suitable for various surfaces, increasing its versatility.
- The process is simple and easy to perform by the average user.
- The kit includes all necessary components for installation.
Cons
- Curing time requires a 24-hour wait before the accessory can be used.
- Not suitable for use on wallpaper, plaster coating, and certain plastics.
- May require extra care for precise alignment during application.
- Requires following instructions closely for best results.
Setup, Compatibility & Care
Setup
- Clean and dry the surface where the accessory will be mounted.
- Attach the adapter to the mounting plate of your GROHE QuickFix accessory.
- Apply the QuickGlue to the adapter.
- Press the mounting plate firmly against the surface.
- Allow 24 hours for the glue to cure completely before use.
Compatibility
- Suitable for use on tiles, marble, stone, glass, concrete, wood, plastic and metal.
- Not suitable for wallpaper, plaster coating, and plastics like PE, PTFE, and PP.
Care
- Wipe up any spilled glue immediately with a damp cloth.
- Avoid contact with skin and eyes. If contact occurs, rinse thoroughly with water.
- Store the glue in a cool, dry place.