Johnstone's Paint - Midnight Sapphire - Matt
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Johnstone's Feature Wall Matt Paint in Midnight Sapphire is designed for homeowners and DIY enthusiasts looking to create a striking focal point in living, dining, or bedroom spaces. Its key benefit is providing a super vivid, trendy colour for a modern aesthetic. A potential caveat is its suitability primarily for feature walls rather than entire rooms if a very bold look is desired.
All features
| Colour | Blue |
|---|---|
| Model Part Number | N |
| Brand | Johnstone's |
Extended Product Information
FAQs
What surfaces can I use this paint on?
This matt emulsion paint is designed for interior walls and ceilings. Ensure the surface is properly prepared and suitable for emulsion paint.
How should I prepare the wall before painting?
The wall should be clean, dry, and free from dust, grease, or old flaking paint. Sand glossy surfaces and wipe clean. New plaster needs to be fully cured.
Does this paint require a primer?
While not explicitly stated, priming is generally recommended for new or problematic surfaces to ensure optimal adhesion and a uniform finish. For new plaster, a mist coat is often advised.
How long does the paint take to dry?
The paint dries quickly, but specific drying times for recoating should be checked on the product's packaging. Ensure adequate drying time between coats.
Can I use this paint for the whole room?
While it can be used for the whole room, this paint is particularly marketed for creating a 'feature wall' due to its vivid colour. Using it throughout an entire room may result in a very intense look.
How do I clean up paint spills or tools?
Clean application tools with water immediately after use. For cleaning decorated surfaces, use a soft damp cloth and avoid abrasive cleaners.
Is this paint suitable for high-moisture areas like bathrooms?
This is a matt emulsion typically designed for general living spaces. For high-moisture areas like bathrooms or kitchens, a paint specifically formulated for those conditions (e.g., kitchen & bathroom paint) might be more suitable.
Troubleshooting
Paint appears patchy or uneven.
Ensure the surface was properly prepared and that paint was applied evenly. Check for adequate paint coverage and apply a second coat if necessary. Stir the paint thoroughly before and during application.
Colour does not match expectations.
Colours can appear differently under various lighting conditions and on different surfaces. Consider purchasing a tester pot first. Ensure the paint has been stirred thoroughly as contents may settle.
Paint is difficult to apply or streaky.
Ensure you are using the correct tools (e.g., suitable roller or brush) and applying with even, consistent strokes. Avoid overspreading the paint.
Pros and Cons
Pros
- Transforms rooms with a bold, trendy colour.
- Provides a modern, sophisticated matte finish.
- Easy to apply, suitable for various skill levels.
- Dries quickly for efficient decorating.
- Durable finish ensures longevity.
Cons
- Best suited for feature walls; may be too intense for entire rooms.
- Specific to walls and ceilings; not for trim or furniture.
- Requires appropriate surface preparation for best results.
Setup, Compatibility & Care
Preparation: Ensure surfaces are clean, dry, and free from dust, grease, or flaking paint. Lightly sand glossy surfaces and wipe clean. New plaster should be allowed to cure fully and may require a mist coat.
Application: Stir the paint well before use. Apply using a brush or roller. For best coverage and a smooth finish, apply in an even manner, avoiding overspreading. A second coat may be required for optimal colour depth. Allow adequate drying time between coats as per manufacturer instructions.
Compatibility: This is a matt emulsion paint suitable for interior walls and ceilings. It is not designed for exterior use or for surfaces that require a gloss or satin finish.
Care: Clean application tools with water immediately after use. For cleaning decorated surfaces, use a soft damp cloth. Avoid abrasive cleaners or excessive scrubbing.