Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
The Bedec Multi-Surface Paint is designed for DIY enthusiasts and professionals seeking a versatile, all-in-one solution for both interior and exterior renovation projects. Its primary benefit is its exceptional adhesion to a wide range of challenging substrates without the need for a separate primer or undercoat, saving significant time during preparation. However, users should note that as a water-based, quick-drying formula, it requires careful technique during application to ensure an even finish before the paint begins to set.
| Colour | White |
|---|---|
| Model Part Number | BEDE2KA0002/70 |
| Brand | Bedec |
Yes, this paint is specifically formulated to adhere to difficult surfaces directly. However, for porous surfaces like bare plaster, a mist coat may be beneficial.
Yes, the paint is compatible with copper, aluminium, and galvanised steel.
Yes, its non-yellowing and heat-resistant properties make it an excellent choice for interior radiators.
You should allow at least 4 hours between coats to ensure the first layer has sufficiently cured.
Yes, it is suitable for tiles, provided the surface is thoroughly cleaned and degreased first.
Ensure the surface was thoroughly cleaned of grease or wax. If the surface is extremely smooth, lightly abrade with fine sandpaper.
Use a high-quality synthetic brush and avoid over-working the paint. The quick drying time means you should lay off the paint with a light touch.
This often indicates that the substrate was damp or contaminated during application. Ensure the surface is completely dry and stripped of debris before re-applying.
Before starting, remove all loose or flaking old paint and ensure the surface is free of grease, dust, and wax; a light sanding is recommended for glossy surfaces to provide a 'key' for adhesion. Stir the paint thoroughly before and during application. If applying outdoors, avoid painting if rain or temperatures below 10°C are forecast within the next 24 hours. Because the paint is water-based, clean your tools immediately after use in warm soapy water. Store the tin in a cool, frost-free environment to maintain the integrity of the formula for future touch-ups.
