Johnstone's Woodcare Garden Colours Paint - Steel Smoke

Currently unavailable

Currently unavailable
This guide is for homeowners and DIY enthusiasts looking to refresh and protect their exterior wood features. Johnstone's Woodcare Garden Colours Paint in Steel Smoke offers a durable, weather-resistant finish that enhances the natural grain of wood while providing long-lasting colour. A potential caveat is that proper surface preparation is crucial for optimal adhesion and longevity.
| Colour | Grey |
|---|---|
| Brand | Johnstone's |
This paint is suitable for most types of exterior wood, including those found on garden furniture, sheds, fences, arbours, summer houses, and trellis.
Ensure the furniture is clean, dry, and free from dirt, grease, and flaking paint. Lightly sand smooth surfaces for better adhesion. Repair any damaged areas.
Yes, but only after properly preparing the surface. Remove any loose or flaking paint and lightly sand the surface to ensure good adhesion.
Apply the paint evenly with a brush or roller, working in the direction of the wood grain. Avoid applying excessively thick coats, as this can lead to a less smooth finish and prolonged drying times.
The paint is formulated to be fade-resisting and long-lasting, designed to withstand harsh garden weather and maintain its vibrancy for an extended period.
Clean your brushes and tools immediately after use with water. This will prevent the paint from drying on them.
This paint is designed to colour and protect while allowing the natural grain to show. It may offer some coverage for knots, but for complete opacity, multiple coats or a specific knot-sealing primer might be necessary.
Ensure the surface was properly cleaned and prepared. Remove any loose paint, dirt, or grease. Lightly sand the surface before application.
Stir the paint thoroughly before and during use. Ensure consistent application technique and avoid over-brushing. Apply a second coat if necessary.
Check for temperature extremes. Avoid thinning unless absolutely necessary and only use a manufacturer-approved thinner. Ensure the lid was sealed properly after the last use.
This paint is designed to colour and protect. If a clear finish is desired, a different product would be more suitable. For this product, ensure you are applying thin, even coats to allow the grain to show.
Preparation:
Application:
Compatibility:
Care: