Evo-Stik Flooring Adhesive - 2.5 Litre - Cream
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone using Evo-Stik Flooring Adhesive to install flooring. It provides a permanent bond for various flooring types, offering ease of use for interior porous floors. A key consideration is ensuring proper surface preparation for optimal adhesion and a lasting bond.
All features
| Colour | Cream |
|---|---|
| Model Part Number | 30812302 |
| Brand | Evo-Stik |
Extended Product Information
FAQs
What surfaces is Evo-Stik Flooring Adhesive suitable for?
It is suitable for use on interior porous floors such as concrete, cement/sand screed, wood, chipboard, and plywood.
What types of flooring can I use this adhesive with?
This adhesive is suitable for most types of PVC flooring, cork tiles, linoleum, latex foam or jute backed carpeting.
How much area does one litre of adhesive cover?
One litre of adhesive will cover approximately 3m² to 4m², depending on the floor covering.
How should I prepare the surface before applying the adhesive?
Ensure the surface is clean, dry, and free from any loose materials or contaminants. Remove any old adhesive residue before application.
How do I clean up the adhesive?
Clean tools and spills immediately with water while the adhesive is still wet. Once dry, removal may require solvents.
Is this adhesive suitable for outdoor use?
No, this adhesive is designed for interior use only.
What is the shelf life of this adhesive?
The shelf life can vary. Always check the expiration date on the product packaging.
Troubleshooting
Flooring is not adhering properly.
Ensure the substrate is clean and prepared correctly. Check that the correct amount of adhesive has been applied and that sufficient pressure was applied during installation. Check the expiration date of the adhesive.
Adhesive takes too long to dry.
Ensure proper ventilation in the room. Check the temperature and humidity levels, as these can affect drying time.
Adhesive is visible after installation.
Apply the adhesive evenly and avoid excessive amounts. Remove any excess adhesive immediately with a damp cloth.
Pros and Cons
Pros
- Easy application due to ready-mixed formula.
- Suitable for a wide range of flooring materials.
- Provides a permanent and durable bond.
- Compatible with common porous floor substrates.
Cons
- Coverage varies based on the flooring type.
- Requires proper surface preparation for optimal results.
- Limited to interior use only.
- Specific application methods are required for different flooring types.
Setup, Compatibility & Care
- Surface Preparation: Ensure the substrate is clean, dry, and free from any loose materials or contaminants. Remove any old adhesive residue before application.
- Application: Apply the adhesive evenly using a notched trowel, following the manufacturer's recommendations for the specific flooring type.
- Flooring Installation: Carefully place the flooring onto the adhesive, ensuring proper alignment.
- Rolling: Use a flooring roller to ensure good contact between the flooring and the adhesive, eliminating air pockets.
- Drying Time: Allow the adhesive to dry completely, following the manufacturer's guidelines, before using the floor.
Evo-Stik Flooring Adhesive is compatible with concrete, cement/sand screed, wood, chipboard, and plywood. Avoid use in areas with excessive moisture or direct sunlight. Clean tools and spills immediately with water while the adhesive is still wet. Once dry, removal may require solvents.