Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
The Arthouse Metallic Brick Wallpaper is designed for homeowners and interior decorators seeking to infuse a modern or industrial aesthetic into their living spaces through a contemporary, textural brick pattern. Its primary benefit is the combination of a sophisticated navy blue base with striking gold metallic highlights, which instantly elevates the visual depth of feature walls in living rooms, bedrooms, or dining areas. A key caveat to consider is that this wallpaper is not suitable for high-moisture environments like bathrooms, and it requires a traditional 'paste-the-paper' application method.
| Pattern | Geometric |
|---|---|
| Colour | Blue |
| Model Part Number | 692200 |
| Brand | Arthouse |
No, this wallpaper is not moisture-resistant and should not be used in bathrooms or other high-humidity areas.
An off-set match means the pattern on the second strip must be dropped down to match the pattern of the first strip, usually by half the pattern repeat length.
This product uses the traditional wet-removable method, meaning it can be soaked with water and a wallpaper removal solution to loosen the adhesive for stripping.
The metallic finish is durable under normal indoor conditions, provided it is kept away from direct, harsh sunlight and excessive moisture.
To calculate, divide the perimeter of your room by the width of the roll (0.53m) and account for your ceiling height, always adding at least 10% for pattern matching and trim waste.
Ensure you are observing the 32cm off-set match requirement during installation; measure and cut your strips to allow for this stagger.
Use a smooth wallpaper brush or a plastic smoother to push air bubbles outward toward the nearest edge while the adhesive is still wet.
Carefully lift the edge, apply a small amount of wallpaper seam adhesive, and press firmly back into place.
Setup: This is a "Paste the Paper" product. Ensure you have the correct wallpaper adhesive and a clean, flat table for prepping your strips. Apply the paste evenly to the back of the wallpaper and allow it to soak for the manufacturer's recommended time before hanging.
Compatibility: This wallpaper is compatible with most standard interior dry-wall surfaces. It should not be used in kitchens or bathrooms where steam and water exposure can degrade the adhesive or paper finish.
Care: Maintenance is straightforward. Use a clean, soft sponge slightly dampened with water to gently wipe away surface dust or small smudges. Avoid harsh chemical cleaners or abrasive scrubbing, as these can damage the metallic ink finish.
