JBL Live 680NC Wireless On-Ear Headphones - Blue
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The JBL Live 680NC Wireless On-Ear Headphones in Blue are designed for music lovers and professionals seeking immersive audio and clear communication. They offer superior JBL Signature Sound with Hi-Res Audio, advanced noise cancellation, and excellent call quality, making them ideal for daily commutes, focused work, or travel. A potential caveat is the on-ear design, which might not suit everyone for extended wear compared to over-ear models.
All features
| Colour | Blue |
|---|---|
| Headphones Noise Cancellation | Active |
| Series | Live 680NC |
| Model Part Number | X5859 |
| Brand | JBL |
Extended Product Information
FAQs
How long does the battery last?
The headphones offer up to 80 hours of continuous audio playback with ANC off and up to 50 hours with ANC on. A quick 5-minute charge provides approximately 4 hours of playtime.
Can I use these headphones with two devices at once?
Yes, the JBL Live 680NC supports multi-point connection, allowing you to connect to two Bluetooth devices simultaneously and switch between them seamlessly.
How do I activate or adjust noise cancellation?
Noise cancellation is activated by default when powered on. You can adjust the ANC level, activate Ambient Aware mode, or fine-tune settings through the JBL Headphones App.
Can I use the headphones while charging?
Yes, you can use the headphones for audio playback while they are connected via the USB Type-C cable for charging, although this is not the primary intended use for ANC or wireless features.
What is Hi-Res Audio and how do I enable it?
Hi-Res Audio provides superior sound quality with greater detail and range. You can experience Hi-Res Audio by connecting the headphones using the included 3.5 mm to USB Type-C analog audio cable.
How do I reset the headphones to factory settings?
To reset, turn the headphones on. Then, press and hold the Volume Up and Volume Down buttons simultaneously for more than 5 seconds until the LED flashes blue twice and the headset turns off. This will clear all previous pairings and settings.
Are the earcups replaceable?
While not explicitly stated as user-replaceable in standard documentation, the earcups are designed for comfort and durability. For replacement or repair inquiries, please refer to the warranty information or contact JBL customer support.
Troubleshooting
Headphones will not turn on.
Ensure the headphones are charged. Connect the USB Type-C cable and charge for at least 15 minutes. If the issue persists, try a different charging cable and power adapter.
Cannot pair Bluetooth device.
Ensure the headphones are in pairing mode (LED flashing blue). Turn off and on Bluetooth on your device and try again. If already paired to another device, disconnect from that device first or reset the headphones' Bluetooth settings.
No sound or low volume.
Check the volume level on both the headphones and your connected device. Ensure the correct audio source is selected. If using a wired connection, check that the cable is fully inserted into both the headphones and the device.
Noise cancellation not effective.
Ensure ANC is activated. Check the JBL Headphones App for ANC settings and ensure it's not set to Ambient Aware. Make sure earcups are properly sealed around your ears.
Microphone not working during calls.
Verify that microphone access is granted to the calling application. Ensure the microphones are not obstructed. Try reconnecting the headphones or restarting your device.
Audio skipping or intermittent connection.
Move closer to your Bluetooth device. Reduce the number of active Bluetooth devices nearby. Ensure your device's firmware is up to date. If possible, use the wired connection for a stable audio stream.
Pros and Cons
Pros
- Exceptional audio quality with JBL Signature Sound and Hi-Res Audio support.
- Effective True Adaptive Noise Cancelling 2.0 for immersive listening.
- Clear call quality thanks to the 2-mic system with AI.
- Extremely long battery life (up to 80 hours) with fast charging.
- Convenient multi-point connection for seamless device switching.
- Comfortable and portable design with a foldable structure.
Cons
- On-ear design may not be as comfortable as over-ear models for very long listening sessions.
- ANC might not be as isolating as some premium competitors for extremely loud environments.
- Requires the JBL Headphones App for full customization of ANC and EQ.
- Bluetooth version 6.0 might not be compatible with very old devices.
Setup, Compatibility & Care
Setup:
- Charging: Before first use, fully charge the headphones using the included USB Type-C cable and a compatible power source.
- Power On: Press and hold the power button until the LED indicator lights up.
- Pairing: Enable Bluetooth on your device. Press and hold the Bluetooth button on the headphones until the LED flashes blue. Select "JBL Live 680NC" from your device's Bluetooth list.
- Multi-Point Connection: To connect to a second device, repeat the pairing process while connected to the first. The headphones will automatically switch.
Compatibility:
- Wireless: Compatible with any Bluetooth-enabled device (smartphones, tablets, laptops) supporting A2DP, AVRCP, HFP profiles. Supports Bluetooth 6.0 with LE Audio for enhanced performance with compatible devices.
- Wired: Use the included 3.5 mm to USB Type-C cable for a wired connection to devices with a 3.5 mm audio jack or USB-C audio output. This also enables Hi-Res Audio playback.
Care:
- Cleaning: Gently wipe the earcups and headband with a soft, dry or slightly damp cloth. Avoid harsh chemicals or abrasive materials.
- Storage: Use the included carrying pouch to protect the headphones from dust and scratches when not in use. Store in a cool, dry place.
- Avoid Moisture: Do not expose the headphones to water or excessive moisture. The microphones and charging port are not waterproof.