Dulux Trade Diamond Eggshell Tinted - White - 1L
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Dulux Trade Diamond Eggshell 1L is a versatile, water-based emulsion paint designed for interior walls, ceilings, and wood surfaces. Its key benefit is superior stain resistance and durability, thanks to the unique Stain Repellent Technology and Diamond Technology, making it 10 times tougher than similar products like Vinyl Silk. A caveat is that custom-mixed colours, like the 'Light Base' variant, are non-refundable.
All features
| Colour | White |
|---|---|
| Model Part Number | 5090481 |
| Brand | Dulux Trade |
Extended Product Information
FAQs
Can this paint be used outdoors?
No, Dulux Trade Diamond Eggshell is specifically designed for interior use only.
How long does it take to dry?
The paint typically dries in about 6 hours, and you can recoat after a minimum of 4 hours, depending on conditions like temperature and humidity.
Is this paint suitable for bathrooms and kitchens?
Yes, its superior stain resistance and durability make it ideal for kitchens and bathrooms where surfaces are more likely to get marked or splashed.
Can I get this paint in colours other than white or magnolia?
Yes, this 'Light Base' variant can be tinted to a wide range of colours. Please check with your stockist for available colour options.
How do I clean the paint after it has dried?
The paint is designed to be repeatably wipeable. You can clean it with a cloth or scrub it gently with a sponge. For best results, allow the paint to fully cure before heavy cleaning.
What is the coverage rate?
The surface coverage is approximately 16 square meters per litre.
Is this paint low in VOCs?
Yes, it has a medium VOC content of 17 g/l, making it a lower-odour option compared to solvent-based paints.
What surfaces can I use this paint on?
It is suitable for interior walls, ceilings, plaster, masonry, and wood.
Troubleshooting
Paint not adhering or peeling
Ensure the surface was properly prepared, clean, and dry before application. Old lead paints require special safety precautions.
Uneven finish or brush marks visible
Stir paint thoroughly before and during use. Apply paint evenly with consistent pressure using a good quality brush or roller. Ensure proper dilution for sealing new surfaces if necessary.
Surface still shows marks after wiping
Allow the paint to fully cure (up to 7 days) before attempting intensive cleaning. Use a damp cloth for routine wiping and avoid abrasive cleaners.
Paint is too thick or too thin
Stir thoroughly. If still too thick, a small amount of clean water can be added for the first coat on bare surfaces as per dilution notes. Avoid over-thinning for subsequent coats.
Pros and Cons
Pros
- Exceptional stain resistance makes maintenance easy.
- High durability stands up well to daily wear and tear.
- Water-based formula is low odour and quick drying.
- Suitable for a variety of interior surfaces, including wood.
- Can be cleaned repeatedly without losing its finish.
Cons
- Custom-mixed colours are non-refundable.
- Requires proper surface preparation for optimal results.
- Drying time can be affected by temperature and humidity.
- Not suitable for outdoor use.
Setup, Compatibility & Care
Surface Preparation:
Ensure all surfaces are sound, clean, and dry before application. New or bare surfaces require sealing with a thinned coat of Dulux Trade Diamond Eggshell (1 part water to 10 parts paint). For previously painted surfaces, ensure they are in good condition. Always refer to the Dulux Trade Datasheet 408 for comprehensive preparation guidelines.
Application:
Stir thoroughly before use. Apply using a brush, roller, or spray. For best results, apply two full coats. On surfaces previously painted with similar shades, one coat may suffice.
Compatibility:
Suitable for use on plaster, masonry, and wood for interior applications. Not recommended for outdoor use.
Drying and Recoating:
Allow approximately 6 hours for drying. Recoat after a minimum of 4 hours and a maximum of 6 hours, depending on ambient temperature and humidity.
Tool Cleaning:
Clean all equipment with water immediately after use, removing as much paint as possible first.
Storage:
Store in a cool, dry place, protected from frost and extreme temperatures.