Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
The Dulux Once Satinwood Paint in Pure Brilliant White is designed for those seeking a durable, long-lasting satin finish on interior and exterior wood and metal surfaces. Its key advantage is the single-coat application, eliminating the need for an undercoat, which saves significant time and effort. However, it is a solvent-based paint with a high VGOC content, requiring good ventilation and careful handling due to its flammability and potential for allergic reactions.
| Colour | White |
|---|---|
| Model Part Number | 5091095 |
| Brand | Dulux |
No, Dulux Once Satinwood is formulated for single-coat application on primed or previously painted surfaces, eliminating the need for a separate undercoat.
This paint is suitable for both interior and exterior wood and metal surfaces, such as doors, skirting boards, window frames, and metal railings.
It has a drying time of approximately 16 hours before it's fully dry to the touch and can be recoated if necessary, though a second coat is typically not required.
A 750ml tin of Dulux Once Satinwood Paint covers up to 9 square meters, depending on the surface porosity and application method.
Since it is a solvent-based paint, you should clean your brushes and rollers immediately after use with white spirit or a proprietary brush cleaner designed for solvent-based paints.
Yes, Dulux Once Satinwood is designed for both interior and exterior wood and metal surfaces, offering long-lasting durability against the elements.
This paint provides a luxurious satin finish, offering a subtle sheen that is less reflective than gloss but more so than matt.
Ensure the surface is properly prepared (clean, dry, primed if bare). Apply the paint evenly and avoid overspreading it too thinly. If the surface is very dark, a second coat might be necessary, though typically not required.
Check the room temperature and humidity; extreme cold or high humidity can significantly extend drying times. Ensure good ventilation in the area where painting is taking place. Avoid applying overly thick coats.
Ensure you are applying the paint evenly and not overloading your brush or roller. Use a good quality brush/roller designed for satinwood paints. Avoid re-working paint once it starts to set.
This is a solvent-based paint, and a strong odor is normal. Ensure maximum ventilation during application and drying by opening windows and doors. The odor will dissipate as the paint dries and cures.
Immediately wash affected skin thoroughly with soap and water. Seek medical advice if irritation or rash persists. Always wear protective gloves and long sleeves when handling the paint to prevent skin contact.
