EUHOMY Countertop Ice Maker - White


Currently unavailable


Currently unavailable
The EUHOMY Countertop Ice Maker is designed for home users, office workers, and entertainers who need a reliable, fast source of fresh ice without the need for a plumbed connection. It offers the key benefit of rapid production, yielding fresh bullet-shaped ice in as little as six minutes, though users should be aware that it requires manual water refills and does not maintain the ice in a frozen state once the machine is powered off.
| Colour | White |
|---|---|
| Model Part Number | HZB-12/H |
| Brand | EUHOMY |
It is recommended to run the self-cleaning cycle at least once a week or whenever the unit has been sitting inactive for more than a few days.
Yes, using distilled or filtered bottled water can reduce mineral buildup inside the machine compared to hard tap water.
The first few batches are often smaller as the machine reaches the optimal operating temperature. Continued use will produce consistent, full-sized cubes.
No, the machine is designed for quiet operation and produces less than 45dB of noise, making it comparable to a whisper.
The infrared sensors will detect the full basket and automatically pause production until you remove some of the ice.
Ensure the water tray is properly seated and the sensors are clean of any mineral buildup or debris.
Check that the ambient temperature is not too high and ensure there is adequate ventilation around the unit's cooling vents.
This often occurs if ice is left in the basket too long; transfer the ice to a freezer or increase the frequency of clearing the basket.
Setup is straightforward: place the unit on a flat, level surface away from direct sunlight and heat sources. Allow the machine to sit upright for at least 24 hours before first use to allow the refrigerant to settle. To care for your machine, perform the self-cleaning cycle regularly, especially if the unit will sit unused for several days. Always use fresh, clean water, and wipe the exterior with a soft, damp cloth. Ensure the ventilation area around the sides and back remains clear of obstructions to maintain cooling efficiency.