Stanley IceFlow™ Flip Straw 2.0 Tumbler - Green - 410 ml

Currently unavailable

Currently unavailable
The Stanley IceFlow™ Flip Straw 2.0 Tumbler in Green, 410 ml, is designed for individuals seeking to maintain consistent hydration throughout their day, whether at work, studying, or exercising. Its key benefit is providing a convenient and spill-proof way to keep favorite beverages at hand. A minor consideration is its 410 ml capacity, which may require more frequent refills for heavy drinkers. This tumbler features a leak-proof lid, dual-use for hot and cold drinks, easy maintenance, and a stylish, simple design suitable for active lifestyles.
| Colour | Green |
|---|---|
| Container Volume | 410 ml |
| Brand | Stanley |
The lid and straw are dishwasher safe. For a more thorough clean, use a small brush to clean inside the straw and around the lid's moving parts. Ensure all components are dried completely before reassembly.
While the tumbler is designed for both hot and cold drinks, it is generally not recommended for highly carbonated beverages, as pressure buildup could affect the seal or cause spillage when opened.
Stanley typically offers a lifetime warranty on their products against defects in materials and workmanship. Please refer to the official Stanley warranty information for specific details and claims.
Yes, 410 ml is equivalent to approximately 13.8 fluid ounces, which is a standard size for a large cup of coffee. It should accommodate a typical serving comfortably.
Stanley products are known for their durability. The colored finishes are designed to be long-lasting. Following the care instructions, especially avoiding abrasive cleaners, will help maintain the color's vibrancy.
Replacement straws are often available for Stanley tumblers. You may be able to purchase them directly from Stanley or authorized retailers.
Ensure the lid is securely fastened to the tumbler. Check that the flip straw is fully closed and properly seated within the lid mechanism. Verify the silicone seal is clean and intact.
Disassemble the lid and straw. Clean all parts thoroughly with a bottle brush. Ensure no debris is obstructing the straw's passage. Reassemble correctly.
Preheat or pre-chill the tumbler before filling. For hot beverages, fill with boiling water for a few minutes and empty. For cold, fill with ice water. Ensure the lid is tightly sealed.
This is normal for some conditions. For cold beverages, ensure the lid is sealed properly. The tumbler is designed to minimize condensation, but extreme external temperatures can sometimes cause minor exterior moisture.
Setup:
Compatibility:
Care Instructions: